Got my Greg Welds
#1
Got my Greg Welds
Today. It was so nice to take a 15x3.5 wheel and put it up and spin it freely with no grinding and no spacer. Tires will be here tomorrow and they will be on, then pictures!!!!
#5
Not yet. Well they do, but only in a 6.5 backspace, so it will stick out a bit, some people dont mind it, others do. As far as I know they plan to make a 7.5 backspace but it wont be for a while. I think for now Im going to rock 15x8 5.5 backspace greg welds, with stock calipars. Grinded calipars with the prostars scares me. Alot.
Trending Topics
#8
#11
i was in hope for these rims for rears with no grinding but yet another wheel company fell short..https://ls1tech.com/forums/showthrea...=906991&page=5 the 15x8's dont even clear the lt1 grinded brakes let alone ls1 brakes. but they are suposed to make new ones????? i dont understand this.
#13
#17
Wow this thread is old! Hahah, I ordered mine from my work, but you guys can order them through Summit, or through me, if I become a vendor here.
PS here is a better picture with them actually on the car with tires.
PS here is a better picture with them actually on the car with tires.
#18
When you decide to switch tires/rims next month let me know. I may be in the market for a tire/rim setup like you and the Trigger-man next year. May as well pick your sloppy seconds.
#19
Hahah I'll let you know. Your welcome to borrow mine whenever. But after my trans swap/rear end is done, I think my next set will be the Billet Specialties.