Will 15x10 and 15x3.5 weld draglites fit my car?
#1
TECH Enthusiast
Thread Starter
Join Date: Feb 2007
Location: FL
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
Will 15x10 and 15x3.5 weld draglites fit my car?
Car is a 99z28, stock brake and suspension.
I found some for sale and I am not sure if they will fit. (They are the 5 lug universal) So I am worried if they will clear the brakes.....
Thanks,
Steve
I found some for sale and I am not sure if they will fit. (They are the 5 lug universal) So I am worried if they will clear the brakes.....
Thanks,
Steve
#2
TECH Enthusiast
iTrader: (5)
You will have to run spacers on the front and grind the rear calipers. Also get longer wheel studs. Sounds like alot of work but looks good in the end! Try to make sure one of the bolt patterns is the one you need before you buy them though and check the back spacing.
#3
TECH Senior Member
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
are they 15x10 with 7.5 back spacing? if they are the right sizes you will need new wheels studs, spacers and you will have to grind your rear calipers down.
Trending Topics
#10
TECH Fanatic
iTrader: (9)
Join Date: Dec 2004
Location: Schaumburg, IL
Posts: 1,693
Likes: 0
Received 0 Likes
on
0 Posts
here is a thread on grinding for welds and also has info on studs and what spacers to use..
https://ls1tech.com/forums/drag-racing-tech/744837-grinding-calipers-101-a.html
https://ls1tech.com/forums/drag-racing-tech/744837-grinding-calipers-101-a.html
#12
TECH Enthusiast
Thread Starter
Join Date: Feb 2007
Location: FL
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
So the BS is 6.5 but they clear all but the little bump in the middle of the caliper, they stick out a little bit but it look like they will work fine
Also, where can I buy wheel spacers and extended studs?
Also, where can I buy wheel spacers and extended studs?
Last edited by stevegrizzle; 06-30-2008 at 03:52 PM.