C6Z06 19X12s with 325s on a Camaro
08-03-2008, 04:08 PM
#1
Banned
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Posts: 781
Likes: 0
Received 0 Likes
on
0 Posts
C6Z06 19X12s with 325s on a Camaro Tucking 325s. I rolled the quarters flat and slightly flared them.. i did the BFH on the inner wheel well and i also massaged the area above the bump stop. [this area where it bulges out some for spring. Besides that im only using a 1/8" spacer thats right 1/8". the rear is a stock LT1 rear. I will need to use tubular control arms along with adjustable panard bar. for the pics i disconnected panard bar and centerd rear up so i can fit wheels.
ok now onto pics
this pic shows the distance between wheel and wheel well
here is proof of tire size
ok pics of car with 300lbs in the rear so it will sit like this at ride height
just empty height again
car is gutted for time being since im rebuilding it
ok now onto pics
this pic shows the distance between wheel and wheel well
here is proof of tire size
ok pics of car with 300lbs in the rear so it will sit like this at ride height
just empty height again
car is gutted for time being since im rebuilding it
08-03-2008, 04:11 PM
#2
Banned
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Posts: 781
Likes: 0
Received 0 Likes
on
0 Posts
before anyone says. eveythign is just mocked up like my CME and frotn is only held on by a few bolts. all temp for fit ment
to the left is a 88mm turbo'd silverado if anyone is wondering
to the left is a 88mm turbo'd silverado if anyone is wondering
