Firebird Double DIN bezels
Hi Jesse, I meant to get back quicker on that but I've been a bit tied up. It will fit. Actually I haven't found one that wouldn't with the exception of the cheapy units that are made to fit on the surface of whatever they are gong in. They usually don't have a surround plate and are a bit oversized. All the quality brand name units go by standard sizes and tend to stick to that pretty well.
Sounds great! All my contact info is on the site here:
http://www.keeaudio.com/id25.html
I have also added this to the "Special Deals" section (tab on the left hand side) so that it can be purchased more easily. Here's a link:
http://www.keeaudio.com/id81.html
http://www.keeaudio.com/id25.html
I have also added this to the "Special Deals" section (tab on the left hand side) so that it can be purchased more easily. Here's a link:
http://www.keeaudio.com/id81.html
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo LOL!! I have one! I just haven't had time to start cutting into it yet. I stripped it and put in my work area to start on but I need to finish off all the Firebird ones first. They are just "easier" to do. I will do a Camaro bezel as soon as I get these others knocked out! Thanks for the offer though....I may take you upon that later. I'll PM you with details when I'm ready to work on the Camaro bezel.
In that case I owe you back $26.00! With trade in the bezel is $99.00. I will get that back to you through Paypal as soon as the bezel gets here. Your order is going out tomorrow though. Thanks!!
LOL!! I have one! I just haven't had time to start cutting into it yet. I stripped it and put in my work area to start on but I need to finish off all the Firebird ones first. They are just "easier" to do. I will do a Camaro bezel as soon as I get these others knocked out! Thanks for the offer though....I may take you upon that later. I'll PM you with details when I'm ready to work on the Camaro bezel.
TECH Enthusiast
Joined: May 2004
Posts: 709
Likes: 0
From: San Jose, NorCal
Hey Kee, I'm more than interested in buying a bezel from you. I can send my bezel out to you by the end of this week. Also, my interior is ebony, so could you make mine that as well? You stated that an Alpine Double din will fit, Jesse didnt state what model but mine is IVA-W505. Hope this'll fit perfect too.
I'll also send in 2 extra bezels to ya just for anyone. I bought 3 cause I was about to start making my own but since yours looks perfect, I'll just let them go.
I'll also send in 2 extra bezels to ya just for anyone. I bought 3 cause I was about to start making my own but since yours looks perfect, I'll just let them go.
Sounds great! All my contact info is on the site here:
http://www.keeaudio.com/id25.html
I have also added this to the "Special Deals" section (tab on the left hand side) so that it can be purchased more easily. Here's a link:
http://www.keeaudio.com/id81.html
http://www.keeaudio.com/id25.html
I have also added this to the "Special Deals" section (tab on the left hand side) so that it can be purchased more easily. Here's a link:
http://www.keeaudio.com/id81.html
I was able to go to my mechanics shop yesterday and pull my factory bezel out of my 95 'Bird. I packaged it up and I am on my way out the door to ship it to you. On the shipping label, in the reference section, I put ref: LS1TECH.COM Post #23 and Post #27. I'll send you a PM with my personal info. Thanks again for this deal!
Hey Kee, I'm more than interested in buying a bezel from you. I can send my bezel out to you by the end of this week. Also, my interior is ebony, so could you make mine that as well? You stated that an Alpine Double din will fit, Jesse didnt state what model but mine is IVA-W505. Hope this'll fit perfect too.
I'll also send in 2 extra bezels to ya just for anyone. I bought 3 cause I was about to start making my own but since yours looks perfect, I'll just let them go.
I'll also send in 2 extra bezels to ya just for anyone. I bought 3 cause I was about to start making my own but since yours looks perfect, I'll just let them go.
Make sure you PM me about the bezels you are sending me! I'm about to shoot you a PM here in just a minute! It's a good thing by the way!
Hey Kee Audio..
I was able to go to my mechanics shop yesterday and pull my factory bezel out of my 95 'Bird. I packaged it up and I am on my way out the door to ship it to you. On the shipping label, in the reference section, I put ref: LS1TECH.COM Post #23 and Post #27. I'll send you a PM with my personal info. Thanks again for this deal!
I was able to go to my mechanics shop yesterday and pull my factory bezel out of my 95 'Bird. I packaged it up and I am on my way out the door to ship it to you. On the shipping label, in the reference section, I put ref: LS1TECH.COM Post #23 and Post #27. I'll send you a PM with my personal info. Thanks again for this deal!
I have listed them on the site as 'Temporarily out of stock". Just so everyone knows I am just trying to get finished up with the orders I have now so I don't get behind.
I will be taking more orders on these soon as I catch up on the orders I have already.
Just wanted everyone to know and keep everyone informed! I will change it back soon! Thanks!!
I will be taking more orders on these soon as I catch up on the orders I have already.
Just wanted everyone to know and keep everyone informed! I will change it back soon! Thanks!!
