. Anyways the speaker had two positive conections and 2 negative connections?? y'z this? 
step by step guide for speaker install?
Thread Starter
On The Tree
Joined: Jan 2009
Posts: 177
Likes: 0
my instructions were assuming you have the proper speaker for the Trans Am Monsoon amplifier. What speaker are you currently trying to put in there, it isn't a best buy special is it? The stock speakers are 4ohm dual voice coil. If you have a 4ohm speaker you could just use one pair of wires but you will only get half the power to the speaker. I say, return the speakers and get the correct replacement.
the bazooka 6.5" subs from keeaudio.com could be a nice choice.
the bazooka 6.5" subs from keeaudio.com could be a nice choice.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Once you get a DVC speaker; this thread has some points for an install: https://ls1tech.com/forums/stereo-el...ll-w-pics.html
The installation of the thread above is extreme. (Most people re-use the old wiring harness and many just use self-tapping screws to make new mounting holes.) However; you should pay special attention to the point about washers on the screws.
The installation of the thread above is extreme. (Most people re-use the old wiring harness and many just use self-tapping screws to make new mounting holes.) However; you should pay special attention to the point about washers on the screws.
