Keylesss entry remote

Reply Subscribe

Thread Tools

Search this Thread

Mar 17, 2009 | 01:14 PM

redbeauty2012

Thread Starter

Launching!

iTrader: (1)

Joined: Dec 2008

Posts: 237

Likes: 0

From: Iowa

Keylesss entry remote

does anybody know where i can get a new remote for keyless entry? would a dealer have one or is there any other place that would sell them cheaper?

Mar 17, 2009 | 02:32 PM

ROCNDAV

TECH Junkie

iTrader: (100)

Joined: Mar 2004

Posts: 3,725

Likes: 2

From: Pasadena, CA

ebay search for FOB

Mar 18, 2009 | 04:19 PM

stdjsw311

TECH Regular

iTrader: (10)

Joined: Jul 2005

Posts: 416

Likes: 0

From: Huntsville, TX

i just bought mine at the dealer it was i think 69.99 and programmed it in about 5 mins myself. i dont know how i lived without it!!!

Mar 18, 2009 | 10:50 PM

samson_420

TECH Addict

iTrader: (1)

Joined: Nov 2007

Posts: 2,372

Likes: 0

From: Narnia

eGay . . . . .35 Bucks.

Mar 19, 2009 | 12:34 AM

Twisted636

On The Tree

iTrader: (3)

Joined: Jun 2008

Posts: 177

Likes: 0

From: Henderson ky

how are they programed if you get one?

Mar 19, 2009 | 01:13 AM

Z28LS1camaroguy

TECH Addict

iTrader: (3)

Joined: Apr 2005

Posts: 2,905

Likes: 0

From: Northern Kentucky

Have each transmitter you intend to match ready for the
next steps. To match transmitters to your vehicle:
1. Turn the ignition to RUN, then to OFF. This
will disarm the Vehicle and Contennow ready to match the vehicle.
2. Remove the RADIO fuse. This fuse is located in the
main fuse block which is located on the left side of
your main instrument panel. When the fuse block is
open the radio fuse is located on the lower right hand
corner of your instrument panel.
3. Turn the ignition from OFF to RUN three times
quickly (within five seconds). The vehicle will
respond by locking the doors, unlocking the driver’s
doors and releasing the hatch. Your transmitter is
now ready to match the vehicle.
4. Press and hold the LOCK and UNLOCK buttons on
the first transmitter for 15 seconds. The vehicle will
respond as in Step 3.
5. Repeat Step 4 for the remaining transmitters.
6. When you have finished matching all of your
7. Check that all transmitters work by pressing
transmitters, replace the RADIO fuse.

Mar 19, 2009 | 11:48 PM

marors1

Teching In

iTrader: (1)

Joined: Apr 2006

Posts: 27

Likes: 0

From: Jackson, WI

Yeppers, get one off ebay make sure it is the same numberthat is on the back of your fob (I think I searched that number) Then follow the easy directions above.