02 Trans am System Install [Pic's]
#81
TECH Enthusiast
Thread Starter
Join Date: Nov 2009
Location: Brownsville, texas
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Was thinking of adding an extra battery in the back
just for the sound system
any methods to charge both the front battery and this secondary battery i might be installing?
just for the sound system
any methods to charge both the front battery and this secondary battery i might be installing?
#83
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
unless u plan on bumping the system with car off for an hour plus at a time in my opinion its totally unnecessary. do big3 and call it a day. if u add a battery u have to decide if you want to isolate or not
#84
TECH Enthusiast
Thread Starter
Join Date: Nov 2009
Location: Brownsville, texas
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
what alternator would be good? not to familiar with alternators ...
#86
On The Tree
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm really interested in this setup. I love what you got going on and it mirrors perfectly with what i wanted in my mind.
Coould you hit me up with a link on where and what cables I should get. I'm a total dumbass when it comes to systems.
What did you do about the speakers in the rear hatch area?
Also, when a speaker system says its a 2-way 110w speaker set. Is that 110w per speaker or 110w for the pair?
sorry for the ignorance. . . . gotta start sometime.
Coould you hit me up with a link on where and what cables I should get. I'm a total dumbass when it comes to systems.
What did you do about the speakers in the rear hatch area?
Also, when a speaker system says its a 2-way 110w speaker set. Is that 110w per speaker or 110w for the pair?
sorry for the ignorance. . . . gotta start sometime.
#87
TECH Resident
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i absolutely love your setup man. i want to do the exact same thing to my car and so glad you posted this because i could not figure out how i would do the stealth box and amp rack so i'm glad you suggested sound thump. but i have 6.5 alpine type r components for the doors, 6.5 alpine type r for the sail panel and 6x9 alpine type r for the rear hatch which i will have to modify for them to fit. i'm pushing those with an alpine pdx 4.100 and will be pushing a jl 10w3 with an alpine pdx 1.600.
#89
TECH Enthusiast
Thread Starter
Join Date: Nov 2009
Location: Brownsville, texas
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
#90
TECH Enthusiast
Thread Starter
Join Date: Nov 2009
Location: Brownsville, texas
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a Question
ive been thinking about doing the BIG 3 and a relocation battery mod (spare tire)
Is it difficult to do the relation?
and where would i have to run the wire too?
ive been thinking about doing the BIG 3 and a relocation battery mod (spare tire)
Is it difficult to do the relation?
and where would i have to run the wire too?