dash lights no worky
#2
Ungrounded Moderator
iTrader: (4)
Have you checked the fuses? There are two fuses involved in the dash lights. If your tail lights aren't working then the TAIL LPS fuse is probably the problem. If the tail lights are working then the IP DIMMER fuse is probably blown. Never rely on visual inspection of fuses - they can be blown but look fine. Always use a tester or replace with a known good fuse.
#3
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: deland,fl
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
yeah it blows the fuse and if i put a larger one in it will route itself to blow a smaller one.had a guy tell me the ceramic in the headlight switch is broken and replace had one laying around didnt work.
#7
I am having this same problem. My ip dimmer fuse will blow when I raise the brightness everytime.... I just did a tick master cylinder install and I thought that when I pulled up the harness it may have pulled something loose but they were working right after the install. Anymore ideas?