Help me build up a sub system
08-07-2010, 04:33 AM
#1
Staging Lane
Thread Starter
Join Date: Jul 2010
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Help me build up a sub system Got a sealed box that fit 2 12s
And I want your guy's input on what type of sub/amp combo that will go perfectly with it
And btw im running on the stock Monsoon HU
And I want your guy's input on what type of sub/amp combo that will go perfectly with it
And btw im running on the stock Monsoon HU
08-07-2010, 03:18 PM
#6
Staging Lane
Thread Starter
Join Date: Jul 2010
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Well I really don't know the dimension of it cause it shaped weird, it goes in the t-top storage area of the car,
I took some pictures so you guys would have an idea what it looks like, the last owner said that he fit Kicker CVRs in them.
Left speaker hole looking at the right
Same left speaker hole looking at the left
I took some pictures so you guys would have an idea what it looks like, the last owner said that he fit Kicker CVRs in them.
Left speaker hole looking at the right
Same left speaker hole looking at the left
Trending Topics
08-08-2010, 04:49 PM
#8
Staging Lane
iTrader: (1)
Join Date: Jun 2010
Location: KY
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
I ran a Kicker CompVR 12" in a sealed box in my last vehicle (Jeep XJ) powered by an Eclipse 600 watt amp. It was a very nice set up - clean and sharp hits. I like my rock so I thought the CompVR was a good sub for that type of music.
08-15-2010, 06:08 PM
#9
TECH Regular
Join Date: May 2008
Location: Marissa, Il
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
I have had a few setups in the past. My favorite sub setup was a JL 10w3 ported on a Pheonix Gold MPS2240 with a basecube. It was rediculous for 1 midgrade 10.
The others were, single 10w4 ported on rubocon 1000.2, dual 12w3 sealed and
3 10w3's sealed on a soundstream Rubicon 1000.2
My last system was JL Audio XR 6.5 components front, 4.5 XR coax rear (with XR crossovers) Rubicon 1000.2 on front components, rubicon 355 5 channel on rear coax with sub channel running 10w3 ported. Loved it!
The others were, single 10w4 ported on rubocon 1000.2, dual 12w3 sealed and
3 10w3's sealed on a soundstream Rubicon 1000.2
My last system was JL Audio XR 6.5 components front, 4.5 XR coax rear (with XR crossovers) Rubicon 1000.2 on front components, rubicon 355 5 channel on rear coax with sub channel running 10w3 ported. Loved it!
