Remote starter install
Thread Starter
Launching!
Joined: Aug 2008
Posts: 254
Likes: 0
From: NY
Remote starter install I am installing a Viper 5901 in my 99 camaro A4 and need all the help i can get.
i didn't see any hows to's online so if u know please post if not lets make this HOW To
Bypass is done n easy part
need help with the remote start harnes
H2/16- BLU/WHT (-) 200mA 2ND STATUS/REAR DEFFOGER OUTPUT
H2/10- DRK BLU (-) 200mA STATUS OUTPUT
H2/11- PINK/WHT (-) 200mA FLEX RELAY CONTROL OUTPUT
Harness 3
H3/1 PINK (+) IGNITION 1 INPUT/OUTPUT
H3/2 RED/WHITE (+) FUSED (30A) IGNITION 2 / FLEX RELAY INPUT 87
H3/3 ORANGE (+) ACCESSORY OUTPUT
H3/4 VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL)
H3/5 GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER KILL WIRE)
H3/6 RED (+) FUSED (30A) IGNITION 1 INPUT
H3/7 PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT
H3/8 PINK/BLACK (+) FLEX RELAY INPUT 87A key side (if required) of FLEX RELAY
H3/9 RED/BLACK (+) FUSED (30A) ACCESSORY/STARTER INPUT
H3/10 NC (no connection) NC
Pics of quick install sheet
http://i150.photobucket.com/albums/s...m/IMG_4712.jpg
http://i150.photobucket.com/albums/s...m/IMG_4709.jpg
http://i150.photobucket.com/albums/s...m/IMG_4710.jpg
http://i150.photobucket.com/albums/s...m/IMG_4707.jpg
http://i150.photobucket.com/albums/s...m/IMG_4708.jpg
i didn't see any hows to's online so if u know please post if not lets make this HOW To
Bypass is done n easy part
need help with the remote start harnes
H2/16- BLU/WHT (-) 200mA 2ND STATUS/REAR DEFFOGER OUTPUT
H2/10- DRK BLU (-) 200mA STATUS OUTPUT
H2/11- PINK/WHT (-) 200mA FLEX RELAY CONTROL OUTPUT
Harness 3
H3/1 PINK (+) IGNITION 1 INPUT/OUTPUT
H3/2 RED/WHITE (+) FUSED (30A) IGNITION 2 / FLEX RELAY INPUT 87
H3/3 ORANGE (+) ACCESSORY OUTPUT
H3/4 VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL)
H3/5 GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER KILL WIRE)
H3/6 RED (+) FUSED (30A) IGNITION 1 INPUT
H3/7 PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT
H3/8 PINK/BLACK (+) FLEX RELAY INPUT 87A key side (if required) of FLEX RELAY
H3/9 RED/BLACK (+) FUSED (30A) ACCESSORY/STARTER INPUT
H3/10 NC (no connection) NC
Pics of quick install sheet
http://i150.photobucket.com/albums/s...m/IMG_4712.jpg
http://i150.photobucket.com/albums/s...m/IMG_4709.jpg
http://i150.photobucket.com/albums/s...m/IMG_4710.jpg
http://i150.photobucket.com/albums/s...m/IMG_4707.jpg
http://i150.photobucket.com/albums/s...m/IMG_4708.jpg
Last edited by legendarysouls; Jan 19, 2011 at 11:00 AM.
i dont mean to hijack but i just have a quick question for anybody with experience. Do all Directed (Viper, Clifford, Automate, etc) alarm/remote starts hook up the same way? My gf has one installed on her car and i was wondering if replacing it with a newer one would be a real hassle.
i dont mean to hijack but i just have a quick question for anybody with experience. Do all Directed (Viper, Clifford, Automate, etc) alarm/remote starts hook up the same way? My gf has one installed on her car and i was wondering if replacing it with a newer one would be a real hassle.
Oh, OP, PLEASE post up the diagrams you have and such for installing it. I've been wanting to install my for a couple months now, but didn't wanna end up with my car torn apart for a week trying to trace down little problems and such with the install.
Thread Starter
Launching!
Joined: Aug 2008
Posts: 254
Likes: 0
From: NY
spy25,
only thing u gotta do is cut old harness and wire new harness to old harness existing wire.... best bet is to get old wiring diagram and match it to new one
sq,^^^
i will asap just scanning in every diagram and double checking everything... BTW i m doing resistor BYPASS with starter kill.... NOT flash module
i am also waiting for sensors to come in from ebay
got them all
only thing u gotta do is cut old harness and wire new harness to old harness existing wire.... best bet is to get old wiring diagram and match it to new one
sq,^^^
i will asap just scanning in every diagram and double checking everything... BTW i m doing resistor BYPASS with starter kill.... NOT flash module
i am also waiting for sensors to come in from ebay
got them all
Trending Topics
http://www.bfranker.badz28.com/fbody/alarm96up.htm
The information in the link above helped me install my Viper 5900 alarm with remote start and remote up/down windows on my 02 Z28. There were a few things that I had to tweak but nearly followed the instructions step by step and the install went perfectly. Definitely read it a few times and make sure you have a long time for the install.
The information in the link above helped me install my Viper 5900 alarm with remote start and remote up/down windows on my 02 Z28. There were a few things that I had to tweak but nearly followed the instructions step by step and the install went perfectly. Definitely read it a few times and make sure you have a long time for the install.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
Launching!
Joined: Aug 2008
Posts: 254
Likes: 0
From: NY
^^
thanks i already study tht site install lol waiting for the snow here to stop to attempt this install i might make a how to
Ya spy,
just open the kick panel and see what model old system she has and google the install manuel. then cut the harness going into her old system then use the old feeds and wire them to new harness .
thanks i already study tht site install lol waiting for the snow here to stop to attempt this install i might make a how to
Ya spy,
just open the kick panel and see what model old system she has and google the install manuel. then cut the harness going into her old system then use the old feeds and wire them to new harness .
