Alternate Headlight Lifters?
Huh, so just so im clear. You have turned your turn signals into full on head lights?
If so I give props. The title might be off but the work and creativity is out of the box. Its nice to see someone else doing something different
If so I give props. The title might be off but the work and creativity is out of the box. Its nice to see someone else doing something different
You got it. The title's off just because of the way the project evolved, but like I said a few posts back, that project is still in the works. I agree though - while they may not be all that well-done, or in any way related to what I said I was going to do, I think they're neat simply because nobody has ever done it before, afaik.
I'll get those up ASAP. It was dark by the time I finished, so no pics yet.
That would be possible, but a lot more difficult since there's no mounting holes in those inlets. You'd have to do the same thing I'm going to end up doing, which is finding someplace solid and fabbing a bracket.
That would be possible, but a lot more difficult since there's no mounting holes in those inlets. You'd have to do the same thing I'm going to end up doing, which is finding someplace solid and fabbing a bracket.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Yeah yeah... nobody more than me. Like I said though, still working on the original idea, but I'm in the middle of building the engine right now, so... yeah, could be a bit.
The project is still on the back burner. I've stumbled across a few helpful threads, particularly this one over at HIDPlanet. I'm currently in the process of rewiring the entire car, relocating all the fuse/relay components and PCM to a single location under the dash, but I'm integrating a relay harness for the headlights in there, so it's not completely being neglected haha.
