Check out these mini amps from Rockford Fosgate!
#1
Closed ex-Sponsor Account
Thread Starter
iTrader: (3)
Join Date: Nov 2008
Location: Dickeyville Wisconsin
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
Check out these mini amps from Rockford Fosgate!
I just got some of these amps in today. WOW
They are really small! Check out my cell phone on top of them to give you an idea in size!
These will easily fit below the seats of your car.
PBR300x4
PBR300x1
$149.99 each!
Click here for more info and ordering
The PBR300X4 is a full-range 4-channel amplifier designed for stereo front/rear systems that requires little space.
The BRT (Boosted Rail Technology) is an ultra efficient design that generates 300 Watts of power!
The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system.
Details:
4-channel car amplifier
75 watts RMS x 4 at 4 ohms
non-bridgeable, 4-ohm stable per channel
CEA-2006 compliant
Boosted Rail amp technology
Dynamic Thermal Management cooling system
selectable high- and low-pass filters (80 Hz, 12 dB/octave)
differential-balanced inputs eliminate noise from your vehicle's electrical system
preamp and speaker-level inputs
10-gauge power and ground leads and a 30-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 30-amp in-line fuse between the distribution block and the amplifier is recommended
dimensions: 6-15/16"W x 1-9/16"H x 4-5/16"D
The PBR300X1 is a mono amplifier designed for a subwoofer system that requires little space.
The BRT (Boosted Rail Technology) is an ultra efficient design that doesn't even use a switching power supply to generate its 300 Watts of power!
The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system.
Product Features:
Punch Series BR Mono Block Car Amplifier
RMS Power Rating:
4 ohms: 75 watts x 1 chan.
2 ohms: 150 watts x 1 chan.
1 ohm: 300 watts x 1 chan.
Max Power: 924 watts x 1 chan.
Ultra compact chassis
Remote bass level input (remote level control sold separately)
LED power and protect indicators
Mono channel operation
Optional PEQ provides 0dB to +18dB @ 45Hz
High level speaker input connection
Low level RCA input connection
NOMAD protection circuitry
Convection cooling design
Extruded aluminum heat sink
Input sensitivity:
Low level: 150mV-4V
High level: 400mV-11V
Variable DC offset sensitivity
Built-in 12dB/octave Butterworth crossover
Crossover frequency: 35-250 Hz
Frequency response: 20-250 Hz
Damping factor: >200
CEA-2006 compliant amplifier
Frequency response: 20-250 Hz
Dimensions: 6-3/4"L x 4-1/4"W x 1-1/2"H
10 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
They are really small! Check out my cell phone on top of them to give you an idea in size!
These will easily fit below the seats of your car.
PBR300x4
PBR300x1
$149.99 each!
Click here for more info and ordering
The PBR300X4 is a full-range 4-channel amplifier designed for stereo front/rear systems that requires little space.
The BRT (Boosted Rail Technology) is an ultra efficient design that generates 300 Watts of power!
The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system.
Details:
4-channel car amplifier
75 watts RMS x 4 at 4 ohms
non-bridgeable, 4-ohm stable per channel
CEA-2006 compliant
Boosted Rail amp technology
Dynamic Thermal Management cooling system
selectable high- and low-pass filters (80 Hz, 12 dB/octave)
differential-balanced inputs eliminate noise from your vehicle's electrical system
preamp and speaker-level inputs
10-gauge power and ground leads and a 30-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 30-amp in-line fuse between the distribution block and the amplifier is recommended
dimensions: 6-15/16"W x 1-9/16"H x 4-5/16"D
The PBR300X1 is a mono amplifier designed for a subwoofer system that requires little space.
The BRT (Boosted Rail Technology) is an ultra efficient design that doesn't even use a switching power supply to generate its 300 Watts of power!
The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system.
Product Features:
Punch Series BR Mono Block Car Amplifier
RMS Power Rating:
4 ohms: 75 watts x 1 chan.
2 ohms: 150 watts x 1 chan.
1 ohm: 300 watts x 1 chan.
Max Power: 924 watts x 1 chan.
Ultra compact chassis
Remote bass level input (remote level control sold separately)
LED power and protect indicators
Mono channel operation
Optional PEQ provides 0dB to +18dB @ 45Hz
High level speaker input connection
Low level RCA input connection
NOMAD protection circuitry
Convection cooling design
Extruded aluminum heat sink
Input sensitivity:
Low level: 150mV-4V
High level: 400mV-11V
Variable DC offset sensitivity
Built-in 12dB/octave Butterworth crossover
Crossover frequency: 35-250 Hz
Frequency response: 20-250 Hz
Damping factor: >200
CEA-2006 compliant amplifier
Frequency response: 20-250 Hz
Dimensions: 6-3/4"L x 4-1/4"W x 1-1/2"H
10 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
#4
Closed ex-Sponsor Account
Thread Starter
iTrader: (3)
Join Date: Nov 2008
Location: Dickeyville Wisconsin
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
I just got them today
I am converting our shop truck in a 2000 Durango over to double din and thought I would try these out
I still like the Kenwood XR series and the ARC Audio mini amps the best
Digital Designs has a new 5 channel mini amp coming out too
125 x 4 and 1 at 800
Trending Topics
#8
Closed ex-Sponsor Account
Thread Starter
iTrader: (3)
Join Date: Nov 2008
Location: Dickeyville Wisconsin
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
ARC mini amps are awesome
Highly recommend them
The XDI or KS Series
We sell alot of them in our Corvette speaker packages.
Once we get the new 6.5 DVC 4ohm subs being made for us for you guys your going to see alot of new speaker packages coming using the ARC mini amps, along with the Kenwood XR series
The new stealth boxes are in production now and we will be sending them to Digital Designs for a sub made to best perform in the box as well.
We do so much with the C5, C6 Corvette and Viper owners now. Just working on finalizing special deals for speaker packages you guys are going to love.
#11
TECH Regular
iTrader: (4)
Join Date: Aug 2007
Location: Edmond, OK
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
We've got the new RF Boosted Rail amps on our "Wall of Bass" display at the shop I work at...they get down for such a small package. We're running 16 RF P1 12's off one of those PBR 300.1! And it gets down!