Amping off of the factory monsoon
Amping off of the factory monsoon i've tried searching but can't find the answer, I have a 02 z/28 and I want to use the stock monsoon deck (I know it won't be the best before you guys tell me that). I know I need a level converter, but on the front speakers do i put the line converter before or after the factory amp? also what wires would i put in the line converter, I know there is 2 sets on the front speakers, the sail panel speakers seem easy enough but the fronts confuse me, HELP!
u connect the line level converter to the speaker wires that go to the front speakers from the amp in the back of the car (put the converter in the back next to the amp), thats how my line level converter in connected and works perfect
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I don't know if you are still looking for an answer but the best place for a full range line level tap-in is from any of the head unit outputs to the amp. Unless you are using the Pax unit, I always recommend doing this in the rear of the car at the amp input harness.
Almost nobody really listens though because many use the pax unit up front, or are happier tapping off the hatch or sail panel speaker leads. Tapping in at the amp input harness is the cleanest signal point.
The monsoon deck is just a normal Delco deck - it sends four full range speaker level signals to the monsoon amp.
Almost nobody really listens though because many use the pax unit up front, or are happier tapping off the hatch or sail panel speaker leads. Tapping in at the amp input harness is the cleanest signal point.
The monsoon deck is just a normal Delco deck - it sends four full range speaker level signals to the monsoon amp.
how is there 4 outputs on the back of the factory deck if the signal for the highs goes directly to the speakers, and then the amp in the back goes to the mids in the front? that would be 4 outputs just for the front speakers (2 directly to tweets, and 2 to amp for mids) then you still got sails and hatch speakers