how to make ta fog lights stay on w/ hi beam?
#22
TECH Apprentice
Join Date: Jul 2002
Location: Canada
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to make ta fog lights stay on w/ hi beam?
Only problem is now you can't turn foglamps off. And wait until you have to change that burned out lamp do to excessive use. Do not put brighter bulbs in as you will melt the plastic lens. There is a better way to keep fogs on with high beams which involves only switching two wires behind the foglamp switch. Then you can turn them out anytime you don't need them as well.
#23
TECH Enthusiast
Join Date: Jul 2002
Location: Pensacola, FL
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to make ta fog lights stay on w/ hi beam?
Check my site listed in sig...
I have a foglamp mod that allows the fogs to be turned on/off and the button light functions as intended. Don't just cut the wires, remember to ground them or insulate them as instructed. Trust the guinea pig on this one.
This works on Camaros for sure, but I have already had a T/A owner do it and the wires were identical except for colors, so this might involve some experimenting for Pontiac owners.
Dave
<small>[ October 13, 2002, 05:12 PM: Message edited by: ratio411 ]</small>
I have a foglamp mod that allows the fogs to be turned on/off and the button light functions as intended. Don't just cut the wires, remember to ground them or insulate them as instructed. Trust the guinea pig on this one.
This works on Camaros for sure, but I have already had a T/A owner do it and the wires were identical except for colors, so this might involve some experimenting for Pontiac owners.
Dave
<small>[ October 13, 2002, 05:12 PM: Message edited by: ratio411 ]</small>