pics of humounts?
#63
11 Second Club
iTrader: (103)
Join Date: Aug 2005
Location: South of West Point Iowa
Posts: 2,633
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by _JB_
Why do you have three fog light buttons?
and one to power my cutout circuit. . . Thanks for noticing Sorry took me 3 months to see this.
Duff
#64
TECH Resident
iTrader: (3)
Join Date: Nov 2001
Location: Lake Delton, WI
Posts: 811
Likes: 0
Received 0 Likes
on
0 Posts
Here are a couple pics of mine before installation. I was worried that there would be too much of a gap and would possibly show the metal mounting sleeve w/o the plastic OEM trim ring installed (like I have seen a few times in this thread), but the hole in the aluminum plate was just the perfect size! I will be wiring up my LED's to my remote turn on lead though instead of my dimmer, as I don't drive the car much at night. This way the LED's will light up when I turn the radio on, not to mention that my head unit has the same color blue for it's lighting around the large ***** .....so it should look amazing. I already have a relay wired up from when I originally installed my system (using my head unit's remote turn on as the trigger), as I have multiple components turning on with my head unit and I didn't want to overload my head unit's remote turn on, so I did this. I will be wiring my LED's into this.....
#74
TECH Resident
iTrader: (3)
Join Date: Nov 2001
Location: Lake Delton, WI
Posts: 811
Likes: 0
Received 0 Likes
on
0 Posts
here's mine installed.....
the lighting sucked and I couldn't use the flash because it would have washed out the LED's. Also you can see a blue reflection, this is not the light bleeding through...it's just a reflection off of that particular surface. I made sure that there was no bleed-through before I mounted it The LED's turn on and shut off with the stereo.
the lighting sucked and I couldn't use the flash because it would have washed out the LED's. Also you can see a blue reflection, this is not the light bleeding through...it's just a reflection off of that particular surface. I made sure that there was no bleed-through before I mounted it The LED's turn on and shut off with the stereo.
Last edited by JR HAWK 9; 02-25-2007 at 05:06 PM.
#75
Launching!
iTrader: (11)
Join Date: Jun 2004
Location: Lafayette, IN
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JR HAWK 9
here's mine installed.....
the lighting sucked and I could use the flash because it would have washed out the LED's. Also you can see a blue reflection, this is not the light bleeding through...it's just a reflection off of that particular surface. I made sure that there was no bleed-through before I mounted it The LED's turn on and shut off with the stereo.
the lighting sucked and I could use the flash because it would have washed out the LED's. Also you can see a blue reflection, this is not the light bleeding through...it's just a reflection off of that particular surface. I made sure that there was no bleed-through before I mounted it The LED's turn on and shut off with the stereo.