Stealth Boxes
Can anyone post a picture of the back of a stealth box? I bought mine used from a guy that claimed he had it in his TA for a while. However, when we tried to put it in tonight, the raise from the fenderwell gets in the way- it won't go all the way in. It sticks out enough so that it bothers the t-tops going in.
I'm not completely sure- I bought it off a guy from ebay over a year ago. I got busy and stuff and never ended up putting it in until I tried last night with a friend. It's not subthump, but I don't remember if it's homemade or from a company. It looks good, but I don't know.
Here are some pictures of it-
The last picture is how it would look if installed from the back pretty much. The bottom left of the picture is where the fenderwell gives issues.
Here are some pictures of it-
The last picture is how it would look if installed from the back pretty much. The bottom left of the picture is where the fenderwell gives issues.
Last edited by contemptor; Sep 29, 2006 at 04:06 PM.
That looks home made. My JL audio stealth box fits perfect, but weighs a ton (>25lbs).
Not sure why it doesn't fit, but I'm guessing that the back of the box is interferring with the fitment.
Not sure why it doesn't fit, but I'm guessing that the back of the box is interferring with the fitment.
Trending Topics
Originally Posted by The Alchemist
That looks home made. My JL audio stealth box fits perfect, but weighs a ton (>25lbs).
Not sure why it doesn't fit, but I'm guessing that the back of the box is interferring with the fitment.
Not sure why it doesn't fit, but I'm guessing that the back of the box is interferring with the fitment.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
That is definetly a home made box...not that a home made one is bad but that one looks off in the back. Did you try to rotate it a little to see if you can get it in. Lift the back up and try to slide it in with the plastic removed. The depth looks a bit shallow as well. Not that the speaker doesn't fit but it would affect airspace volume. Looking at it from the back it looks like the bottom left corner is in the way. It should have more of an angle. This is from looking at other pics of homemade type boxes. I've owned a Vantage, MTX, and a Subthump enclosure and only had a little trouble with the subthump but it was also a passenger side box. The other two went right in no problem. You may be able to modify that enclosure to get a better fit. The front looks fine. Good luck!!
Hm, looks like I may have my friend attempt to cut and fix it. Don't think I have much other option. We took the plastic off and tired as much as we could to fit it in there but couldn't quite get it.
