noob question.
You need to get is a High Level RCA converter. This little device will tie in to you stock speaker outputs and allow you to plug in an run RCAs to run to a new external amp.
If your gonna install a single sub, might as well opt for an 10"
However it is also possible to simply tap off the rear speaker wires for use with an amp that has high level inputs - or to use a conventional line level converter again off of the rear speakers.
The easiest basic solution is to use an amp with high level inputs and current sensing turn-on. With that all you need to do is tap off the rear speakers, and run you power and ground. Significantly cheaper than buying a pac unit, running RCA's, and a remote turn-on wire.
For an 8" you could fairly easily build a little box to fit in the driver's side cubby hole. They are pre-made for 10" subs and referred to as "stealth boxes".

I would've thought the factory Monsoon setup would sound much like mine.
My thoguths, if you need a sub over the factory setup, you like bass, so might as well go big.
Trending Topics
The Best V8 Stories One Small Block at Time
You won't be able to control the rear gain or fade seperately, but sound will come out.





