Infinity Kappa 6.27i tweeter level switch?
#1
Moderator
Thread Starter
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,604
Likes: 0
Received 6 Likes
on
6 Posts
Infinity Kappa 6.27i tweeter level switch?
Just soldered up the first Infinity replacement for my
car and found the tweeter has a 0 / +3dB (what hype,
it can only attenuate, or not, by the resistor; I guess
-3dB / 0 isn't as "sexy") switch in the tweeter cover.
Anyone who's played with it, which is a better "natural"
fit to the rest of the system, for that setting? Just
looking to avoid pulling the door panel twice.
car and found the tweeter has a 0 / +3dB (what hype,
it can only attenuate, or not, by the resistor; I guess
-3dB / 0 isn't as "sexy") switch in the tweeter cover.
Anyone who's played with it, which is a better "natural"
fit to the rest of the system, for that setting? Just
looking to avoid pulling the door panel twice.
#2
TECH Fanatic
iTrader: (13)
I set mine for 0db but they still made my ears bleed. Now, I didn't have a sub and I replaced both the fronts and the sails with the Kappa's but after about 60 miles I decided to gut the whole system and sold the Kappa's. Again, with a sub maybe they wouldn't have sounded as bright but holy cow were they bright without a sub!
#3
TECH Enthusiast
iTrader: (11)
Join Date: Dec 2002
Location: Iowa
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
I have the 6.37's in my blazer along with matching 5 1/4 in the rear doors.I can't really notice a difference,maybe its because they are down by my feet.Or maybe its the 2 type r 12's and 2000 watts rms hifonics that drown them out .I have all 4 infinitys ran off a hifonics zxi 6406 (170 watts rms x 4 @ 2ohms) and I LOVE IT.
#5
Moderator
Thread Starter
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,604
Likes: 0
Received 6 Likes
on
6 Posts
I put the one in at the 0 setting and it's still plenty
"bright". Might ought to put another ohm or two in
line with it just to settle it down. Next time I'm in
there. For now I think I'll just turn down the treble.
Sure does cut through the wind noise better though.
"bright". Might ought to put another ohm or two in
line with it just to settle it down. Next time I'm in
there. For now I think I'll just turn down the treble.
Sure does cut through the wind noise better though.
#7
TECH Fanatic
iTrader: (13)
Originally Posted by 02trns_am
Can't you adjust them by just taking the speaker cover off and turning the tweeter?