how to unlock doors with aftermarket alarm
#1
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Jun 2006
Location: mcallen tx
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
how to unlock doors with aftermarket alarm
once the car is locked for about 5 min the power shuts off inside and my alarm is installed to send signal to the unlock button. i was told to send a ground signal to a bcm wire at the same time. does anyone know which one that is.
#2
Door Lock Red/Black (-)
Door Unlock Orange/Black (-)
BCM Passenger's Kick
You need two diodes. The cathode sides of each diode to the (-) unlock output of your alarm. Connect the anode side of one diode to the Door Unlock Orange/Black at BCM. Connect the anode side of the other diode to the (-)door pin lead. not 100% sure but i believe its white at the BCM
Door Unlock Orange/Black (-)
BCM Passenger's Kick
You need two diodes. The cathode sides of each diode to the (-) unlock output of your alarm. Connect the anode side of one diode to the Door Unlock Orange/Black at BCM. Connect the anode side of the other diode to the (-)door pin lead. not 100% sure but i believe its white at the BCM