Source for weatherpack crimping tool?
Re: Source for weatherpack crimping tool? what kind of weatherpack connectors are you using? and how many are you going to crimp?
I personally just use a pair of needle nose, and then attack the crimp with a normal crimper.
They make special tools for weatherpack connectors, but cheapest i have found is $90
if interested, PM me, and i'll send you the link.
Ryan.
I personally just use a pair of needle nose, and then attack the crimp with a normal crimper.
They make special tools for weatherpack connectors, but cheapest i have found is $90
if interested, PM me, and i'll send you the link. Ryan.
Re: Source for weatherpack crimping tool? Waytek wire sells the weatherpak connectors and
they also sell tools for 'em. But I just squish
with a generic crimping tool (which doesn't work
all that cleanly) and solder the wires.
Waytek has some funny minimum order quantities
but they ship fast and are OK to deal with.
they also sell tools for 'em. But I just squish
with a generic crimping tool (which doesn't work
all that cleanly) and solder the wires.
Waytek has some funny minimum order quantities
but they ship fast and are OK to deal with.
FYI- Waytek's min orders (as of 7/2004):
100 pieces or $5, which ever is less of 1 item
$35 total order or an additional $5 charge
http://waytekwire.com/
100 pieces or $5, which ever is less of 1 item
$35 total order or an additional $5 charge
http://waytekwire.com/
Registered User
Joined: May 2010
Posts: 1
Likes: 0
I have a Paladin 1300 crimper for amateur radio cables. I use the #2033 die set for WeatherPack connectors, as shown at http://gopherbaroque.webs.com/apps/p...otoid=81304723
Trending Topics
I got the Pressmaster crimp tool frame and weatherpack die set from Pegasus Racing - it was certainly not cheap, but has worked great for all of the connections I've made, and I've made a LOT of those connectors at this point.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
still good info 7 years later. im looking for a set of dies for my project. i already have the frame and dies for basic crimps, im looking for the weather pack ones that fit paladin 1300/8000 series frames. any sugestions or websites?
assemble, connector, connectors, crimp, crimping, die, gm, orlando, pack, pioneer, pressmaster, rating, tool, tools, weather, weatherpack, weathertite
