Post your custom set ups
Post your custom set ups OK guys.. Time to show off your custom audio set up. Subs, boxes, amps, components, speaker pods.... You name it! Lets see what you got...
The system was actually installed in like 2001. The subs have since been replaced by new Alpine Type R's, and with a few other updates it still sounds and looks great.
Basically all Alpine and JL Audio.
Basically all Alpine and JL Audio.
TECH Fanatic
Joined: Nov 2006
Posts: 1,273
Likes: 1
if you search u will find tons, here are pics from a setup i did for a buddy
http://i69.photobucket.com/albums/i6...Paar%20Camaro/
http://i69.photobucket.com/albums/i6...Paar%20Camaro/
Trending Topics
I am probably going to doa pretty big overhall to my system here in a couple of months. When I do I'll post it up here. Tentative equipment list:
1.) JVC AVD-49 Source
2.) CDT HD M-6 in doors
3.) CDT ES-06+ in the sails
4.) Phoenix Gold Octane-R 9.0 5-channel amp
5.) CDT 12" HD SQ-12's in custom hatch enclosure
My current system is:
1.) JVC AVX-1 Source
2.) CDT CL-E61CF in doors
3.) CDT EF-8CF subs in the sails
4.) Fockford Fosgate Power 600.5 (old school) 5-channel amp
5.) RE Audio SE10 x 2 in stealth enclosures
Here's a link: http://www.keeaudio.com/id15.html
Pics are at the bottom of the page and are old. The door pics were when I still had CL-6's in the doors. That set up was good for 144.6db on a Audio Control mic. Need to test on a Term Lab though to get a real number. It is not a SPL system though, I designed it for SQ.
1.) JVC AVD-49 Source
2.) CDT HD M-6 in doors
3.) CDT ES-06+ in the sails
4.) Phoenix Gold Octane-R 9.0 5-channel amp
5.) CDT 12" HD SQ-12's in custom hatch enclosure
My current system is:
1.) JVC AVX-1 Source
2.) CDT CL-E61CF in doors
3.) CDT EF-8CF subs in the sails
4.) Fockford Fosgate Power 600.5 (old school) 5-channel amp
5.) RE Audio SE10 x 2 in stealth enclosures
Here's a link: http://www.keeaudio.com/id15.html
Pics are at the bottom of the page and are old. The door pics were when I still had CL-6's in the doors. That set up was good for 144.6db on a Audio Control mic. Need to test on a Term Lab though to get a real number. It is not a SPL system though, I designed it for SQ.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
nothing too special:
-JL audio cleansweep
-PPI PC-250 amp
-eD 7" subs in sail panels
-PPI 2PC-275 amp
-JL audio 12w6v1
-custom 12" stealth box (made by me)
-custom fiberglass amp rack in spare tire well
-all knuconcpetz wires including 1/0 power
-JL audio cleansweep
-PPI PC-250 amp
-eD 7" subs in sail panels
-PPI 2PC-275 amp
-JL audio 12w6v1
-custom 12" stealth box (made by me)
-custom fiberglass amp rack in spare tire well
-all knuconcpetz wires including 1/0 power
Here's mine. 
I usually don't post pics of mine since it is WELL below the internet standards of this forum's view of quality, but I was going for a clean install and better than the POS factory system. I've been very happy with mine ever since I put it in:
I have an old, crappy Sony head unit that needs to be replaced, but for now, it gets the job done.
I have an old, crappy Sony head unit that needs to be replaced, but for now, it gets the job done.
