LS1TECH - Camaro and Firebird Forum Discussion
Bare firewall about to get some extra sound deadening material.
Bare firewall about to get some extra sound deadening material.
0 2020/12/30 19:23:57
This roll is 25 feet long and 6 inches wide for a total of 12.5 square feet.
This roll is 25 feet long and 6 inches wide for a total of 12.5 square feet.
0 2020/12/30 19:20:08
This is what MDL calls a “push-pull” lever. In my case, the spherical bearing was not articulating properly. When I hung the clutch pedal, the pedal wouldn’t return to its “at rest” position. I spoke with MDL and they had me isolate the lever and it still was binding and not allowing the clutch pedal to freely return to it’s at rest position. I removed the push-pull lever and sent it back to MDL. They shipped me a replacement and it worked perfectly!
This is what MDL calls a “push-pull” lever. In my case, the spherical bearing was not articulating properly. When I hung the clutch pedal, the pedal wouldn’t return to its “at rest” position. I spoke with MDL and they had me isolate the lever and it still was binding and not allowing the clutch pedal to freely return to it’s at rest position. I removed the push-pull lever and sent it back to MDL. They shipped me a replacement and it worked perfectly!
0 2020/12/30 06:03:52
0 2020/12/30 06:03:47
0 2020/12/30 06:03:42
0 2020/12/30 06:03:38
0 2020/12/30 06:03:33
0 2020/12/30 06:03:29
The holes are drilled and the bolts are in. The silver paint on the booster is a little dinged up from the drill.
The holes are drilled and the bolts are in. The silver paint on the booster is a little dinged up from the drill.
0 2020/12/29 02:11:01
Here is the clutch master cylinder mounting plate in position waiting for holes to be drilled. Way too close to the freshly painted brake booster.
Here is the clutch master cylinder mounting plate in position waiting for holes to be drilled. Way too close to the freshly painted brake booster.
0 2020/12/29 02:10:38
Here is the clutch master cylinder mounting plate in position waiting for holes to be drilled. Way too close to the freshly painted brake booster.
Here is the clutch master cylinder mounting plate in position waiting for holes to be drilled. Way too close to the freshly painted brake booster.
0 2020/12/29 02:01:47
0 2020/12/29 01:44:39
0 2020/12/29 01:41:43
The oversized zip ties are from when I took the box apart back in the 2008 time frame to replace a leaking air conditioning evaporator. At the time, I also replaced the heater core. I was going to replace both of those parts again just because I had the entire box out of the car but all the parts are now china made. The parts inside are old but not china. I decided to stay with the older, non-china parts.
The oversized zip ties are from when I took the box apart back in the 2008 time frame to replace a leaking air conditioning evaporator. At the time, I also replaced the heater core. I was going to replace both of those parts again just because I had the entire box out of the car but all the parts are now china made. The parts inside are old but not china. I decided to stay with the older, non-china parts.
0 2020/12/28 04:19:55
0 2020/12/28 04:19:36
I was very disappointed to see that it is china made but it is a good looking product.
I was very disappointed to see that it is china made but it is a good looking product.
0 2020/12/28 04:17:02
0 2020/12/28 04:16:47
Look at that good looking, painted clutch pedal assembly!
Look at that good looking, painted clutch pedal assembly!
0 2020/12/28 03:45:41
0 2020/12/27 14:09:20
I had a full can of grey spray paint so on it went.
I had a full can of grey spray paint so on it went.
0 2020/12/27 14:09:09
My friend Bart suggested that I just take it one step further and paint the Ospho treated parts.
My friend Bart suggested that I just take it one step further and paint the Ospho treated parts.
0 2020/12/27 14:08:54
Ospho treating the clutch bracket and other parts.
Ospho treating the clutch bracket and other parts.
0 2020/12/27 14:08:42
The Ospho treated coupe’s dash skeleton on the left and the bare, rusted donor skeleton.
The Ospho treated coupe’s dash skeleton on the left and the bare, rusted donor skeleton.
0 2020/12/27 14:08:27
I don’t know why it took me so long to realize that I’d need the clutch pedal bracket out of the donor car.
I don’t know why it took me so long to realize that I’d need the clutch pedal bracket out of the donor car.
0 2020/12/27 14:08:09
0 2020/12/27 06:10:48
1991 Mustang GT main harness out.
1991 Mustang GT main harness out.
0 2020/12/25 17:34:18
0 2020/12/25 17:34:13
Column out.
Column out.
0 2020/12/25 17:34:07
0 2020/12/25 17:34:01
0 2020/12/25 17:33:57
0 2020/12/25 17:33:52
A lot of steering column electrical connections!
A lot of steering column electrical connections!
0 2020/12/25 17:33:45
I’d already removed the dashboard and it was such a pain with the passenger side door that I decided to remove it. So much easier getting in and out of the car to do my work!
I’d already removed the dashboard and it was such a pain with the passenger side door that I decided to remove it. So much easier getting in and out of the car to do my work!
0 2020/12/25 17:09:10
0 2020/12/25 17:09:05
I labeled all of the many connections. My plan was to use this main harness out of the donor since I knew it’s history and it was in better shape that the coupe’s.
I labeled all of the many connections. My plan was to use this main harness out of the donor since I knew it’s history and it was in better shape that the coupe’s.
0 2020/12/25 17:09:00
All of these many pictures have been quite helpful for reassembly as well.
All of these many pictures have been quite helpful for reassembly as well.
0 2020/12/25 17:08:55
This is the Holley 302-3 oil pan needed to clear the future Maximum Motorsports MMKM-1 K member.
This is the Holley 302-3 oil pan needed to clear the future Maximum Motorsports MMKM-1 K member.
0 2020/12/25 07:43:47
Hey look! Now only 9,998 to go.
Hey look! Now only 9,998 to go.
0 2020/12/25 07:43:43
This proportioning valve is the very first thing I bolted back onto the car. 9,999 parts to go!
This proportioning valve is the very first thing I bolted back onto the car. 9,999 parts to go!
0 2020/12/25 07:43:38
More parts arriving.
More parts arriving.
0 2020/12/25 07:43:33