spark plug wires that fit headers best + pcv solution
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
spark plug wires that fit headers best + pcv solution
looking for spark plug wires with boots that fit my edelbrock headers nicer than the factory wires. i'm looking at these wires, but i want to make sure the boots are as pictured:
http://www.summitracing.com/parts/TAY-72005/
also, what is the part number of the breather you guys are using on your engines? i'm going to add a pcv setup to this engine.
http://www.summitracing.com/parts/TAY-72005/
also, what is the part number of the breather you guys are using on your engines? i'm going to add a pcv setup to this engine.
#2
A lot of guys use this MSD set
http://www.summitracing.com/parts/MSD-32819/
the plug end can be individualy bent to any angle. They are slightly longer than stockers. They can be set up to clear just about anything.
http://www.summitracing.com/parts/MSD-32819/
the plug end can be individualy bent to any angle. They are slightly longer than stockers. They can be set up to clear just about anything.
#4
A lot of guys use this MSD set
http://www.summitracing.com/parts/MSD-32819/
the plug end can be individualy bent to any angle. They are slightly longer than stockers. They can be set up to clear just about anything.
http://www.summitracing.com/parts/MSD-32819/
the plug end can be individualy bent to any angle. They are slightly longer than stockers. They can be set up to clear just about anything.
The following users liked this post:
Homer_Simpson (01-23-2022)