difference between ls6 and ls6 intake?
Trending Topics
#8
TECH Resident
Thread Starter
Join Date: Oct 2008
Location: Redondo Beach, CA
Posts: 966
Likes: 0
Received 0 Likes
on
0 Posts
I can't turn it upside down unfortunately because it is installed on my motor.
my car has an 01' vette motor, and (apparently) an ls6 intake. I am just trying to verify that it does have an ls6 intake.
Anyway to tell for sure, just from a visual inspection?
#10
12 Second Club
iTrader: (49)
^^^ sorry I came off dickish. The old lady pissed me off so I wasent in the greatest mood.
Your thinking about the FAST intake with the fuel rail indentation.
To the op, if your engine is out of an 01 vette, you have an ls6 intake. 2 ways to tell for sure...one look under the intake on the left side of the tb you will be able to tell if its flat or not...
2. Check the part number. I believe its on the left side of the intake as your looking at the tb opening about half way between #4 and #6 intake runn ers.
Your thinking about the FAST intake with the fuel rail indentation.
To the op, if your engine is out of an 01 vette, you have an ls6 intake. 2 ways to tell for sure...one look under the intake on the left side of the tb you will be able to tell if its flat or not...
2. Check the part number. I believe its on the left side of the intake as your looking at the tb opening about half way between #4 and #6 intake runn ers.
#13
TECH Resident
iTrader: (12)
OP, only way to tell without looking at the bottom is to get the p/n from the left side of the intake, post it up and someone can tell you which one it is.
#14
Launching!
iTrader: (9)
Join Date: Sep 2007
Location: Broken Arrow, OK
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Previous post already mentioned presence of EGR is not fool proof way of telling the difference. I previously had a LS6 intake from SLP with EGR provisions.
OP, only way to tell without looking at the bottom is to get the p/n from the left side of the intake, post it up and someone can tell you which one it is.
OP, only way to tell without looking at the bottom is to get the p/n from the left side of the intake, post it up and someone can tell you which one it is.
#15
#16
Some people are waiting for something to happen here
https://ls1tech.com/forums/generatio...questions.html
https://ls1tech.com/forums/generatio...questions.html
#19
TECH Senior Member
iTrader: (35)
Look at the gap under the intake . If it's lower in the middle than the sides it's a LS1 intake . If it's the same in the middle and sides it's a LS6 intake.
http://www.thedetailzone.com/LS1vLS6.JPG
http://image.popularhotrodding.com/f..._gmpp_07_z.jpg
http://www.thedetailzone.com/LS1vLS6.JPG
http://image.popularhotrodding.com/f..._gmpp_07_z.jpg
#20
TECH Resident
Thread Starter
Join Date: Oct 2008
Location: Redondo Beach, CA
Posts: 966
Likes: 0
Received 0 Likes
on
0 Posts
^^^ sorry I came off dickish. The old lady pissed me off so I wasent in the greatest mood.
Your thinking about the FAST intake with the fuel rail indentation.
To the op, if your engine is out of an 01 vette, you have an ls6 intake. 2 ways to tell for sure...one look under the intake on the left side of the tb you will be able to tell if its flat or not...
2. Check the part number. I believe its on the left side of the intake as your looking at the tb opening about half way between #4 and #6 intake runn ers.
Your thinking about the FAST intake with the fuel rail indentation.
To the op, if your engine is out of an 01 vette, you have an ls6 intake. 2 ways to tell for sure...one look under the intake on the left side of the tb you will be able to tell if its flat or not...
2. Check the part number. I believe its on the left side of the intake as your looking at the tb opening about half way between #4 and #6 intake runn ers.
Look at the gap under the intake . If it's lower in the middle than the sides it's a LS1 intake . If it's the same in the middle and sides it's a LS6 intake.
http://www.thedetailzone.com/LS1vLS6.JPG
http://image.popularhotrodding.com/f..._gmpp_07_z.jpg
http://www.thedetailzone.com/LS1vLS6.JPG
http://image.popularhotrodding.com/f..._gmpp_07_z.jpg
I can't look underneath the intake, it is mounted on motor