love the sig pick.. 
yea you are not going to do that with nittos If you cant hook on the 100shot its not going to get any better with 150 hit 
dyno n20 tunning need some suggestions and hp input
I know lol I'm on a budget. but I'll thow some picks of my mt slicks for ya if ya want. lmao its cool the nittos are my brothers the car would only be driven occasionally. I'd love to see my wheels up like that one day, but first I need a rear end sub frame connectors head and cam. the 150 is gonna be for some **** talkers on the street. Still the car went side ways on the 100shot at 40 roll
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Registered User
Joined: Jan 2012
Posts: 30
Likes: 0
From: Ovid, NY
38 Is going to be rich are you running a 62N for the nitrous side? the 35 is about the only one that will get you close 28 is to lean I would have a 31,32,33 for fuel tuning but depends on the car I'm running 62/33 for my 150 shot. The fuel pressure will greatly play into what fuel jet you will need and being on the stock pump who knows you could be lean with the 35F
Registered User
Joined: Jan 2012
Posts: 30
Likes: 0
From: Ovid, NY
Nos big shot kit. supposed to flow up 500 hp single Nozzle, placed at the fernco ruber. wich ill be putting it on the new 90 degree intake tubbing that I'm going to put when I get rid of the maf. will upgrade to direct port when I have the cash, if I stay n2o still undesided between this route or boost. leaning more and more to n2o...
Nos jetting is a little different than Nx and the jets are not compatible as well with the Nos system and jetting I would get a 63N jet and start with the 38F and then if its rich throw in the 35F that should be a pretty strong hit with 63/35.......
Last edited by v84life; May 1, 2012 at 07:41 PM.
Registered User
Joined: Jan 2012
Posts: 30
Likes: 0
From: Ovid, NY
yea 63N will be good should stick with that on the nitrous side and since you already have a 38,35 I would get a 33 as well I think you will be good with either 63/35 or down to 63/33 possibly if its on the rich side.
I just ordered some jets today for my nos kit. Since I'll be messing with the hundo shot I order 29 32,33,34,36,37,38,39,40,42 my 100 shot is nos jetted to be 31f/51n so hoping 29 will do.
Registered User
Joined: Jan 2012
Posts: 30
Likes: 0
From: Ovid, NY
yes a 33 would be wise to have because most manufactures jetting is on the safe/rich side this is not always the case but start with the 63/38 if its pig rich which it most likely will be got down to 63/35 which should be good but if its still rich 63/33 will do the trick.
Good luck and let it eat!!!
If you tell your tuner you're running br7ef's, he's probably not going to make an issue of it. Before those plugs were out, plenty of people were running a 150 hit on TR6's, myself included. I never melted a motor or plug on a 150 shot, nor did anybody I had running on them (I tune).
Registered User
Joined: Jan 2012
Posts: 30
Likes: 0
From: Ovid, NY
tr6s will work but, like everything else technology gets better and the new age is the non projected tipped plugs for nitrous. Tr6s where the best option for a long time doesn't mean there is not something better now.
I'm not disagreeing, but some of these guys are making it sound like this tuner's an idiot because he recommended the TR6's. Behind the tech, maybe, but that isn't something to crucify the guy over.