paintless dent removal... who's the best around Houston?
#1
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Houston...
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
paintless dent removal... who's the best around Houston?
long story short... last night (friday) I came out to my car to see that there was a large dent in the rear quarter panel... the mark starts from the door (small scrape on the ding protector and no other damage) but is severely pushed in after an inch or two into the quarter panel, the area is lower, between the wheel well and door and I don't see any wheel well damage other than scratched paint on the lip... the small strip (ding protector) is cracked in many places but also conformed with the dent... it really just made me want to cry... no note or anything was left, so I'm stuck paying for it out of pocket (doubt insurance would want me to do a comprehensive claim anyway) ...
not entirely sure if this falls into the "problem area" on these cars because of any structural **** behind the panel... just have hopes that it can be done relatively easy ... keeping my fingers crossed though, don't want to replace the entire panel
not entirely sure if this falls into the "problem area" on these cars because of any structural **** behind the panel... just have hopes that it can be done relatively easy ... keeping my fingers crossed though, don't want to replace the entire panel
Trending Topics
#10
TECH Junkie
iTrader: (10)
Join Date: Jan 2004
Location: Pearland, TX
Posts: 3,778
Likes: 0
Received 0 Likes
on
0 Posts
Dent Blasters did mine. Did a great job, too. I had about six or seven door dings on each side before I finally decided to get it done (that's what you get for parking downtown).
More info in this thread: https://ls1tech.com/forums/appearance-detailing/458988-finally-have-quarter-panel-dents.html
-Mike
More info in this thread: https://ls1tech.com/forums/appearance-detailing/458988-finally-have-quarter-panel-dents.html
-Mike
#11
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Houston...
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
Dent Blasters did mine. Did a great job, too. I had about six or seven door dings on each side before I finally decided to get it done (that's what you get for parking downtown).
More info in this thread: https://ls1tech.com/forums/showthread.php?t=458988
-Mike
More info in this thread: https://ls1tech.com/forums/showthread.php?t=458988
-Mike
i left the camera in the car, but my **** is about the height of the bump strip, between the wheel well and the door if they drill it I assume they can do a reasonable job on it...
#16
TECH Fanatic
iTrader: (4)
Join Date: Nov 2004
Location: houston
Posts: 1,386
Likes: 0
Received 0 Likes
on
0 Posts
Plus one for Lane's Hi-Tech, if i remember correctly the guy that removed the dents from my rear quarter panels was Jose. He did an awesome job. I thought the car was going to need to be painted and the quarter panels pulled, as a matter of fact, knapp chevy told me it was going to cost me 500+ to fix it. Jose got the dents out for a little over 300.
#17
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Mar 2006
Location: Houston...
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
appreciate all the help...
been on the fence about getting insurance involved, but it's likely they'll view it as total panel replacement, but on the other hand, I have many options now as to where to take it...
been on the fence about getting insurance involved, but it's likely they'll view it as total panel replacement, but on the other hand, I have many options now as to where to take it...
#20
long story short... last night (friday) I came out to my car to see that there was a large dent in the rear quarter panel... the mark starts from the door (small scrape on the ding protector and no other damage) but is severely pushed in after an inch or two into the quarter panel, the area is lower, between the wheel well and door and I don't see any wheel well damage other than scratched paint on the lip... the small strip (ding protector) is cracked in many places but also conformed with the dent... it really just made me want to cry... no note or anything was left, so I'm stuck paying for it out of pocket (doubt insurance would want me to do a comprehensive claim anyway) ...
not entirely sure if this falls into the "problem area" on these cars because of any structural **** behind the panel... just have hopes that it can be done relatively easy ... keeping my fingers crossed though, don't want to replace the entire panel
not entirely sure if this falls into the "problem area" on these cars because of any structural **** behind the panel... just have hopes that it can be done relatively easy ... keeping my fingers crossed though, don't want to replace the entire panel
here are just a couple of the links:
http://www.metacafe.com/w/820799/
and
http://www.metacafe.com/w/772404/
Chris.