91 LS Notch Swap.
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Jan 2010
Location: Demotte , IN
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
91 LS Notch Swap.
Well I had an 88 Hatch Foxbody I was going to swap a 5.3 Into . But Things Changed ,and I sold that and bought the car I wanted. 91 Notch. Needs a little body work here and there , but all in all I'm going for a Stock sleeper look.
Specs on car are 1991 Notch Full Interior , 5.0 5speed Car.
Went and picked it up last night.
Progress won't start for a few weeks since I need parts.
So Far I have
- 1991 Ford Mustang Notch
- 5.3
- Harness that needs Rework
- TAC Module
- Coilover's
- Caster Camber Plates
- 5 Star Pony Wheels
- Tubular Control Arms
And I need...
- Walbro 255 LPH Fuel Pump
- Misc Fuel Lines
- Harness Re Worked
- Gas Pedal
- LS 6 Intake
- F Body Oil Pan
- Valve Springs & Retainers
- Cam
- Katech Rod Bolts
- Hedders ,and Exhaust
- AJE LSX K Memeber
- AJE TH400/TH350 Trans Mount
- Torque Converter
- Th400 / TH350
- Trans Shifter
- Line Lock
- Mustang Line Lock Fittings
Specs on car are 1991 Notch Full Interior , 5.0 5speed Car.
Went and picked it up last night.
Progress won't start for a few weeks since I need parts.
So Far I have
- 1991 Ford Mustang Notch
- 5.3
- Harness that needs Rework
- TAC Module
- Coilover's
- Caster Camber Plates
- 5 Star Pony Wheels
- Tubular Control Arms
And I need...
- Walbro 255 LPH Fuel Pump
- Misc Fuel Lines
- Harness Re Worked
- Gas Pedal
- LS 6 Intake
- F Body Oil Pan
- Valve Springs & Retainers
- Cam
- Katech Rod Bolts
- Hedders ,and Exhaust
- AJE LSX K Memeber
- AJE TH400/TH350 Trans Mount
- Torque Converter
- Th400 / TH350
- Trans Shifter
- Line Lock
- Mustang Line Lock Fittings
#2
Staging Lane
iTrader: (5)
Join Date: Dec 2006
Location: dyer indiana
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Good luck on the build. Im in the process of doing and ls1 in my 88 hatch. I have a guy local doing my harness at a very reasonable price. Im in northwest indiana area i could get you a price for yours depending on what you need done to it.
#3
Launching!
Thread Starter
iTrader: (2)
Join Date: Jan 2010
Location: Demotte , IN
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
How much do you have done on yours ,and you using the AJE k member and kooks hedders?
If you'd like to pm me i'd be interested in checking yours out ,and the number for the wiring guy your using.
#4
TECH Enthusiast
iTrader: (1)
Join Date: Oct 2009
Location: auburn ma
Posts: 697
Likes: 0
Received 0 Likes
on
0 Posts
Progress won't start for a few weeks since I need parts.
So Far I have
- 1991 Ford Mustang Notch
- 5.3
- Harness that needs Rework
- TAC Module
- Coilover's
- Caster Camber Plates
- 5 Star Pony Wheels
- Tubular Control Arms
And I need...
- Walbro 255 LPH Fuel Pump
- Misc Fuel Lines
- Harness Re Worked
- Gas Pedal
- LS 6 Intake
- F Body Oil Pan
- Valve Springs & Retainers
- Cam
- Katech Rod Bolts
- Hedders ,and Exhaust
- AJE LSX K Memeber
- AJE TH400/TH350 Trans Mount
- Torque Converter
- Th400 / TH350
- Trans Shifter
- Line Lock
- Mustang Line Lock Fittings
So Far I have
- 1991 Ford Mustang Notch
- 5.3
- Harness that needs Rework
- TAC Module
- Coilover's
- Caster Camber Plates
- 5 Star Pony Wheels
- Tubular Control Arms
And I need...
- Walbro 255 LPH Fuel Pump
- Misc Fuel Lines
- Harness Re Worked
- Gas Pedal
- LS 6 Intake
- F Body Oil Pan
- Valve Springs & Retainers
- Cam
- Katech Rod Bolts
- Hedders ,and Exhaust
- AJE LSX K Memeber
- AJE TH400/TH350 Trans Mount
- Torque Converter
- Th400 / TH350
- Trans Shifter
- Line Lock
- Mustang Line Lock Fittings
#7
Launching!
Thread Starter
iTrader: (2)
Join Date: Jan 2010
Location: Demotte , IN
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Well So far here's what I've spent.
5.3L with harness and computer all accesories . $500 9k mi
Harness Rework $100
Tune ,and Vat's disable $150
Drive by cable throttlebody $ 50
LS1 Intake fuel rail ,and injectors $30
3" Fiberglass VFN Cowl lift off hood ..$300
Walbro 255lph $80
Flaming river master switch with rod $89
QA1 control arms
QA1 Coilovers
Qa1 CC plates
ZEX Nitrous Setup
SBF Ford Long Tubes
Here's what I need yet.
-Trans TH350 or TH400
-Trans Shifter
-Converter 3400 Stall
-AJE K member checking one out tomorrow.
-Hedder flanges
-Car water pump
-build or buy trans x member
I'd bet $400 for misc.
Then build my own exhaust.
5.3L with harness and computer all accesories . $500 9k mi
Harness Rework $100
Tune ,and Vat's disable $150
Drive by cable throttlebody $ 50
LS1 Intake fuel rail ,and injectors $30
3" Fiberglass VFN Cowl lift off hood ..$300
Walbro 255lph $80
Flaming river master switch with rod $89
QA1 control arms
QA1 Coilovers
Qa1 CC plates
ZEX Nitrous Setup
SBF Ford Long Tubes
Here's what I need yet.
-Trans TH350 or TH400
-Trans Shifter
-Converter 3400 Stall
-AJE K member checking one out tomorrow.
-Hedder flanges
-Car water pump
-build or buy trans x member
I'd bet $400 for misc.
Then build my own exhaust.
Trending Topics
#9
Launching!
Thread Starter
iTrader: (2)
Join Date: Jan 2010
Location: Demotte , IN
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Well anything with a motor you can go broke on. I have a rock crawler I've been building for 2 years. got 12k in it and not done... eh...
Build thread here...
http://midwestern4x4.com/forum/showthread.php?t=82
Build thread here...
http://midwestern4x4.com/forum/showthread.php?t=82
#15
Launching!
Thread Starter
iTrader: (2)
Join Date: Jan 2010
Location: Demotte , IN
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Todays update. AJE K member ordered will be here WED.
I took turbines off they are ugly as sin.
http://s178.photobucket.com/albums/w...038_356654.jpg
Well Picked up trans tonight.
TH350 , Reverse Manual Valve Body , Brake And Upgraded Internals.
http://dayton.craigslist.org/pts/1538490943.html
Drove 289 miles each way for it... And Got a shifter and driveshaft for $100 more.
Eh... What a night . I did good minus a $130 speeding ticket in some podunk town. Stupid speed limit signs..
I took turbines off they are ugly as sin.
http://s178.photobucket.com/albums/w...038_356654.jpg
Well Picked up trans tonight.
TH350 , Reverse Manual Valve Body , Brake And Upgraded Internals.
http://dayton.craigslist.org/pts/1538490943.html
Drove 289 miles each way for it... And Got a shifter and driveshaft for $100 more.
Eh... What a night . I did good minus a $130 speeding ticket in some podunk town. Stupid speed limit signs..
Last edited by LS88FoxBody; 02-02-2010 at 02:21 AM.
#17
Launching!
Thread Starter
iTrader: (2)
Join Date: Jan 2010
Location: Demotte , IN
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Here's My Specs that are for motor and trans.
5.3L
LS1 Intake
ARP Rod Bolts
Truck Throttle Body
Futral F13 Cam FMS Custom Grind Camshaft - 230"/232" .595"/.585" 112LSA - aggressive profile with a 2500-6800 RPM range, rough idle
AJE LS1 SBC BBC Swap Motor Plates
AJE K Member
Turbo 350 Trans
TCI Reverse Manual Valve Body
TCI Trans Brake
Converter (3400 Stall ?)
Race Prepped with 20 passes behind 400hp.
Also I'm about to post some pictures of Goodies. I recied motor plates from Jeg's. But apparently even though they said that it was in stock and would ship the k member's backordered to the 16th.
#20
Launching!
Thread Starter
iTrader: (2)
Join Date: Jan 2010
Location: Demotte , IN
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Here's my Most recent Progress. Went to remove the K member and found rust. Had to patch all that before I could do anything. The motor and trans is in now for the first time ,and will come out at least1-2 more times.