Where are you guys getting your intake tubes/hoses?
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Iowa
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
Where are you guys getting your intake tubes/hoses?
Subject pretty much sums it up
I'm needing a 4" ID silicone or rubber 90 degree hose from the TB and a straight piece of 4" of either aluminum or plastic or whatever you guys are using with a 4" coupler
thanks!
I'm needing a 4" ID silicone or rubber 90 degree hose from the TB and a straight piece of 4" of either aluminum or plastic or whatever you guys are using with a 4" coupler
thanks!
#6
TECH Apprentice
Join Date: Aug 2010
Location: Melbourne, FL.
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
For aluminum tubing or at least something that looks like aluminum try using aluminized steel exhaust elbows for heavy truck applications. I hit this one with a buffing wheel and no one knows the difference until I tell them.
For the Rubber Elbows I use SiliconeIntakes.com
Good luck,
Ken Wolkens
For the Rubber Elbows I use SiliconeIntakes.com
Good luck,
Ken Wolkens
Trending Topics
#10
TECH Enthusiast
iTrader: (9)
Join Date: Mar 2008
Location: IL
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
Couplers and clamps from intakehoses.com, plastic tubing is from Airaid. It's very easy to cut and comes in a huge U shape. You could build two or three kits out of one big bend. One day I'll have time to smooth it with sandpaper and paint it gloss black