67 Chevelle LS1 Radiator?
#1
67 Chevelle LS1 Radiator?
What are you guys using for a radiator, I priced a few and Summit sells them for a little over $500. I guess that's not bad but then I ned fans and harness. Suggestions?
#4
TECH Addict
iTrader: (12)
I used a 94 LT1 raditor for my swap in my 68 firebird. The 94s had thicker cores than any other year and it also gave me an very nice set of electric fans to use. The ls1 radiators are thinner cores (not as much cooling capacity). I was able to use stock ls1 fbody radiator hoses too.
Trending Topics
#9
On The Tree
iTrader: (11)
Join Date: Feb 2005
Location: OK
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Anybody tried to fit one of these into your A-Body? They should be enough to keep the LS1 cool since that is what they were made for. That is what I was planning on using, just curious about fitment.
#10
TECH Senior Member
iTrader: (12)
Mind is a eBay one that I got for $449.00 (but that was two years ago) with shrould and duel SPAL fans.. it is alum... no problem except on real hot days (100's) in stop and go traffic with the A/C on.. then it comes up to about 210 max.. I think the ebay store is called Universal...
this is the one that I used.. http://cgi.ebay.com/ebaymotors/CHEVE...spagenameZWDVW
Here is a few that are about the same..
http://cgi.ebay.com/ebaymotors/64-67...7751QQtcZphoto
http://cgi.ebay.com/ebaymotors/NEW-A...spagenameZWDVW
These are in our $500 range..
this is the one that I used.. http://cgi.ebay.com/ebaymotors/CHEVE...spagenameZWDVW
Here is a few that are about the same..
http://cgi.ebay.com/ebaymotors/64-67...7751QQtcZphoto
http://cgi.ebay.com/ebaymotors/NEW-A...spagenameZWDVW
These are in our $500 range..
#11
Banned
iTrader: (115)
^^^ LOL, OR get Ron Davis and be done with it. It will drop temps 20% over stock. It's a little more money than the $500 ebay special but it's twice the radiator. I just sold a guy who had a griffin one. His sprung a leak within 6 months so he decided to get the best and be done with it.
#13
I used an LT1 radiator and fans ($100 on ebay), got a top radiator shroud off a 95 Camaro($10 at junkyard), fan relay from parts store ($35)
Everything fits and works well in a 72 A body.
Everything fits and works well in a 72 A body.
#16
TECH Regular
iTrader: (11)
I just fit an ls1 radiator in my 67 chevelle convertible today.It will fit nice,you just have to trim the bottom of the core support in the corners to get the radiator to slip down between the frame rails.You have to slide it down enough to clear the fill neck.I am building a support to go under the rad.that will bolt to the inside of the frame rails and use the factory ls1 mounts.I will fab a plate on the top after its mounted.Neat thing is I can use factory fans, the 4l60e trans.lines will hook rightup and fac. hoses will work with a little trimming.Lt1 rad will fit exactly the same.
#17
Well I ahve been looking around and found that Jegs sells a Becool radiator for $460. The only problem is they don't have a pic of it so I don't know if it is downflow or crossflow. I have the fans off of a GTO that I would try to use if possible.