Dyno Sheet -New Cam and DOD Delete
#1
Teching In
Thread Starter
Join Date: Jul 2011
Location: Rutland, VT
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Dyno Sheet -New Cam and DOD Delete
Work was done by Mike at Rapid Motorsports and has what he calls his "old man cam" - I'm really pleased with the results. I wanted a mild setup and the car is great with the stock stall converter.
Mike was great about working with my goals of a car that wouldn't blow itself up, he listened and made great recommendations. You can't tell that he had the motor apart; the work is meticulous.
Eric
Mike was great about working with my goals of a car that wouldn't blow itself up, he listened and made great recommendations. You can't tell that he had the motor apart; the work is meticulous.
Eric
#3
Teching In
Thread Starter
Join Date: Jul 2011
Location: Rutland, VT
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Yes, stock heads. The drivability is great - it does push at a stop because of the higher idle.
It doesn't sound much different at idle, but you can feel it shake a bit. It would take a good ear to pick-up on the cam.
I'm backing down the tune on the trans because it is hitting harder than needed on the shifts.
Dropping the hammer at 70mph will break the rear tires loose. 55 to 120 happens so fast it surprises you. Can't wait to get a 1/4 time on it.
It doesn't sound much different at idle, but you can feel it shake a bit. It would take a good ear to pick-up on the cam.
I'm backing down the tune on the trans because it is hitting harder than needed on the shifts.
Dropping the hammer at 70mph will break the rear tires loose. 55 to 120 happens so fast it surprises you. Can't wait to get a 1/4 time on it.
#4
Sounds great! I know my car feels totally different vs stock, so I can imagine another 70 rwhp must pull like a bastard
Let us know how it does at the track, I can't wait to get mine up there as well.
Let us know how it does at the track, I can't wait to get mine up there as well.
#5
TECH Fanatic
iTrader: (2)
Work was done by Mike at Rapid Motorsports and has what he calls his "old man cam" - I'm really pleased with the results. I wanted a mild setup and the car is great with the stock stall converter.
Mike was great about working with my goals of a car that wouldn't blow itself up, he listened and made great recommendations. You can't tell that he had the motor apart; the work is meticulous.
Eric
Mike was great about working with my goals of a car that wouldn't blow itself up, he listened and made great recommendations. You can't tell that he had the motor apart; the work is meticulous.
Eric
what is DOD?
#6
Teching In
Thread Starter
Join Date: Jul 2011
Location: Rutland, VT
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Teching In
Thread Starter
Join Date: Jul 2011
Location: Rutland, VT
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
At the time, I was assigned to Task Force Freedom which was a multi-national group assigned the mission of liberating both the airport and port.
Eric
#11
Teching In
Thread Starter
Join Date: Jul 2011
Location: Rutland, VT
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Mike - the boys are still talking about hearing your WS6 run ;-)
Thanks 2S2F, I served with a lot great people.
I have to give props to Rick at Livernois for redoing the TCM for me to soften it up with the new power.
Thanks 2S2F, I served with a lot great people.
I have to give props to Rick at Livernois for redoing the TCM for me to soften it up with the new power.