TR230/224 dyno results
05-26-2006, 08:47 AM
#1
TR230/224 dyno results well i recently put in my cam,springs,pushrods.retainers,ls6 intake,and asp pully.....and i had been wanting to get it dyno tuned and last night i finally did....we did about freaking 20 pulls....because we couldnt seem to get the air/fuel right....so with alot of moving around we finally got it to 13.0-13.2
...........Man we running running in freaking hott conditions......on one of my pulls the temp it read as the outside temp was like 100 degrees
....but all in all i guess im happy with the results.....386hp with 374tq 
im hoping to hit at least 390hp near winter when it isnt so freaking hott down here.....stoopid laredo weather
thanks to the guys from MSP "Modern Street Performance" from here in laredo for the use of the dynojet dyno.....thanks to marine02ss for helping with the tuning...and a big thanks to Dmoney in here for doing most of the HpTuning...thanks for being patient danny boy
i took a bunch of vids of the dyno pulls i'LL post them up later
heres a few vids
http://media.putfile.com/dynoing-5-25-06
http://media.putfile.com/dyno-day-78-21
...........Man we running running in freaking hott conditions......on one of my pulls the temp it read as the outside temp was like 100 degrees
....but all in all i guess im happy with the results.....386hp with 374tq im hoping to hit at least 390hp near winter when it isnt so freaking hott down here.....stoopid laredo weather
thanks to the guys from MSP "Modern Street Performance" from here in laredo for the use of the dynojet dyno.....thanks to marine02ss for helping with the tuning...and a big thanks to Dmoney in here for doing most of the HpTuning...thanks for being patient danny boy
i took a bunch of vids of the dyno pulls i'LL post them up later
heres a few vids
http://media.putfile.com/dynoing-5-25-06
http://media.putfile.com/dyno-day-78-21
Last edited by steveo346; 05-27-2006 at 08:37 AM.
I feel so special. Numbers are SAE, and yes it was damn HOT! Trending Topics
05-26-2006, 06:39 PM
#9
TECH Senior Member
iTrader: (23)
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by steveo346
Im Not To Sure About Spray Cause I Have A 75k Bottom End And Im Not Sure If It Would Hold Up?????
Good numbers, can you post the graph?
05-26-2006, 08:25 PM
#10
Teching In
iTrader: (1)
Join Date: Aug 2005
Location: Manhattan Kansas
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by steveo346
Im Not To Sure About Spray Cause I Have A 75k Bottom End And Im Not Sure If It Would Hold Up?????
05-27-2006, 08:29 AM
#14
thanks guys...hery blkbird you made about the same hp as me with just headers....sounds like your car might do the same numbers as mine if not a few bit more since you dont live in hell like i do..
the TR230/224 is definetly a performer,when you get on it WOT...just wow
the TR230/224 is definetly a performer,when you get on it WOT...just wow
05-28-2006, 11:30 PM
#15
Launching!
Join Date: Aug 2002
Location: Ontario, Canada
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Nice numbers man. I had the same numbers as you headers only. I made 365/355 with a Cartek 2x on a warm day up here (say 85 deg).
No TB porting, no LS6 intake, and no pulley. I think with those mods the 2x would be close to your 230/224.
Good to see your numbers are nice!
No TB porting, no LS6 intake, and no pulley. I think with those mods the 2x would be close to your 230/224.
Good to see your numbers are nice!
05-31-2006, 08:14 PM
#19
11 Second Club
iTrader: (27)
Join Date: May 2002
Location: East Palestine, OH - USA
Posts: 2,397
Likes: 0
Received 0 Likes
on
0 Posts
Nice numbers!
my results are here: https://ls1tech.com/forums/dynamometer-results-comparisons/476349-tr230-224-a4-dyno.html
my results are here: https://ls1tech.com/forums/dynamometer-results-comparisons/476349-tr230-224-a4-dyno.html