Moz

iTrader: (8)

Does anyone know if the SDCE supplied ProFlo surge valve is louder than the Procharger supplied D1SC kit BPV?Any sound clips of a ProFlo surge valve?

kp

iTrader: (34)

I'm pretty sure the proflow is the same one ATI gives you stock with the D1SC kits these days.

Moz

iTrader: (8)

Can you recommend a louder BPV that mount's in the stock location using the same tube set-up?

Spade

iTrader: (26)

ATI (different ATI) or the Mondo from what I have read.

kp

iTrader: (34)

Just take the pipe off the outlet that goes into the hat from the bypass and that should be plenty loud. Make sure and cap the inlet hat off though

The Mondo and ATI race will need a flange welded on, but the big ATI will most likely be the loudest.

98turbls1

iTrader: (17)

I will let you know how loud the red procharger bypass is this next week... I have to go have the flange welded on but I'll make a vid and post it..

Moz

iTrader: (8)

Thank You for the input guy's!

DuronClocker

iTrader: (25)

I'm going to run the Turbosmart Race Port 52mm BOV on my setup. Needs a flange welded on as well.

Here's a clip of it on C6Dude's car!

http://www.youtube.com/watch?v=iN0Ia7ZkbWA

Not bad for $250!

SilverSS

iTrader: (30)

Dont' cap the inlet, put a filter on it. We need all the air flow we can get.