9 inch center section is this a good deal
#1
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Jul 2008
Location: pearland texas
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
9 inch center section is this a good deal
im looking to buy this and Im just trying to do my research before I do...
i have a complete 2.89 carrier with 3.50 gears, and a 28 spline mini spool. 28 spline support bearing with yoke. need to be set up and i would replace the races on the spool..it has been sitting around for a few years in storage,,,,,,,,i want 100 bucks.
and dose it look like this gear set will work??
http://www.summitracing.com/parts/SUM-740903/
i have a complete 2.89 carrier with 3.50 gears, and a 28 spline mini spool. 28 spline support bearing with yoke. need to be set up and i would replace the races on the spool..it has been sitting around for a few years in storage,,,,,,,,i want 100 bucks.
and dose it look like this gear set will work??
http://www.summitracing.com/parts/SUM-740903/
Last edited by 97camaross; 01-30-2010 at 05:32 PM.
Trending Topics
#12
11 Second Club
iTrader: (103)
Join Date: Aug 2005
Location: South of West Point Iowa
Posts: 2,633
Likes: 0
Received 1 Like
on
1 Post
Have fun shifting then, because you can't press in the clutch, shift the gear to 5th and let out of the clutch in that same 50 feet.... 3-4, possibly, 4-5... nope
and that same time you're pressing in on the clutch, you're loosing acceleration... momentum is then your only friend...
and that same time you're pressing in on the clutch, you're loosing acceleration... momentum is then your only friend...