Ticking
#1
Shirley Temple Drinker
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: IL
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
Ticking
Heres a video of it, WTF is it? Lifter Tick? Deffinatly not rod knock.
http://home.mchsi.com/~strang5/Tick.wmv
(right click save as please)
http://home.mchsi.com/~strang5/Tick.wmv
(right click save as please)
#3
Shirley Temple Drinker
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: IL
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
the motor is warm in that video. Sorry for me being lazy when posting the video, but I was in a hurry to take it * even forgo opening the doors lol * and post it.
Car was ~210degs in that movie. Its worse on cold start up, almost a sewing machine noise. It has NEVER done this before. When it is worse is if your in high gear ( say 5th or 6th at like 40-50mph ) and your just going along idleing on flat grounds, and you come up on a hill, and your just gonna forgo downshifting to maintain speed, and the motor lugs a bit, thats when it makes the noise bad...
Im thinking its something in the valve train, but I'm not too smart.
Car was ~210degs in that movie. Its worse on cold start up, almost a sewing machine noise. It has NEVER done this before. When it is worse is if your in high gear ( say 5th or 6th at like 40-50mph ) and your just going along idleing on flat grounds, and you come up on a hill, and your just gonna forgo downshifting to maintain speed, and the motor lugs a bit, thats when it makes the noise bad...
Im thinking its something in the valve train, but I'm not too smart.
Trending Topics
#8
Shirley Temple Drinker
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: IL
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
Im gonna sea foam it after I get it back from the shop, then I am gonna try to just tighten the headers, if they don't budge, I am gonna replace the gasket on that side ( driverside thanks god )