99345hp

Where I work we get truck loads of flowmaster stuff. I was wondering if anyone has run a single flowmaster 40 series on thier car with it mounted where the stock muffler is. Then have it dumped just before the bumper on drivers side.

How do you think this would sound?

camaro468

iTrader: (6)

i had one on my car sounds good kinda like old school sound i resently put tsp with tds on

99345hp

thats cool. I think I am going to do it just to see what it sounds like. I hate the sound of my borla exhaust.

'00_Z

iTrader: (3)

I don't think it will sound as good as the Borla. Is your Borla the adjustable one, if so try adding or removing plates.

bczee

iTrader: (12)

Whats wrong with old School ? I have two of them on my Chevelle...

camaro468

iTrader: (6)

^ nothing i love the old school sound i have 2 on my 69 camaro too

LS1W66

You mean something ike this




Mufflex 3.5" Single out with a Flowmaster 30 Series Race Muffler.
Pics are before and just after install. I have made a few adjustments since the last photo and the system sets up much tighter now.
I've always been Old School, I loved the sound of my twin 40's on my old T/A, With this setup my Formula seemed to gain a bit torque over the previous 3" SOTL Flowmaster system.

99345hp

yeah exactly like that. How does it sound? I dont know if mine is the adjustable one or not. I dont think so, but it does sound like more sound comes out of the passenger side. I think the reason I dont like it is because I have never liked the sound a glasspack style muffler gives.

I have 2 40 series flows on my s10 and it sounds bad ***.

99_Z28

iTrader: (3)

Im using that setup with a 3" 1 chamber flowmaster. Sounds badass!

99345hp

have any sound clips?

Super Speed

iTrader: (8)

If you don't like the sound of the borla try putting an XR1 muffler in the IPIPE

99345hp

I already have clearance issues with the Y pipe, so I dont need to add anything that is larger in diameter.

Full-Force

iTrader: (11)

Flowmaster already makes a catback like that. I know a guy that has one on his LT1 car. It sounds really good, maybe the best, if you dont mind the single outlet.

You can adjust the tailpipe so its hidden for a no tailpipe look.

00silver6

iTrader: (4)

i have a similar setup lt tsp ory super 44 flowmaster i have some video of the setup let me know if want to hear it

OMGls1jz

iTrader: (5)

^^^ hey man i would like to hear your exhaust set up

00silver6

iTrader: (4)

ok give me a min ill see what i can load it up too and ill post it

99345hp

yeah i want to hear it too

00silver6

iTrader: (4)

bad quality i have a old video recorder

jet hot lt tsp ory 3.5 bullet at merge to super 44 cut out on



cut out off

http://

a little drive outside the car

00silver6

iTrader: (4)

this is with the cut out off before i installed the bullet muffler. the bullet took the rasp away on the flowmaster and with the cutout off. that sound at around 2k it took that away so its a keeper for now

http://

Swift_01_z-28

iTrader: (1)

I have a flowmaster cb with the dual outlet and a cutout, and it sounds good at idle and after it quits rasping when I go wot. I'm really not sure what series the muffler is, cuz it was on the car when I bought it from a horrible dealership. With the cutout off, obviously the muffler doesn't matter.