wantsum410

iTrader: (5)

I have scored a Fast 102 set that will be going on my 383 build in my '72 SS Camaro & need some help on the fuel rail set up.
All the cars [60's & 70's LS conversions]I have built up til now have used the stock rail on either a ls6 or a Fast 92/92 with a single fuel line feed with a stock filter/regulator & return line at the tank.
From what all I have read about on here with the aftremarket rails / regulator & a return line to the tank is the norm.
What rails ....regulators, & any other details do you prefer on your set up that are tried & true .PICS PLEASE

wantsum410

iTrader: (5)

Am I in the rt forum for this ?

wantsum410

iTrader: (5)

Anybody runnin the FAST 102 YET ?

ucanthangwme

iTrader: (12)

^Not just yet. I will be upgrading to one pretty soon for my 408.
I'm waiting to read some answers as well!

hitmanws6

iTrader: (20)

The rails will either have to be stock LS2, the FAST rails or LS1s with the spacer kit. For the regulator stick with stock

rob00ss

not a very good picture but heres a 102 on my car

chon79

iTrader: (24)

Dewman

iTrader: (3)

guess i am kind of confused on what you are asking but you can run a return-less system if you run aftermarket rails

chon79

iTrader: (24)

Nice setup! Quick question - I wanted to run the billet rails, but on FAST's site when you select them, it says you have to also purchase a fuel line kit. Did you have to do this? It was an expensive option (249$ish if I remember)

Dewman

iTrader: (3)

the fuel line kit if i remember comes with the 2 stainless braided lines, adapter for the stock quick disconnect to -6 AN, and depending on the kit you get comes with the gauge with the fitting to place it in the end of the rail.

chon79

iTrader: (24)

^Oh I see, cool thanks man. Based on price, I thought it was a complete fuel line to run from the back of car to engine bay.

wantsum410

iTrader: (5)

So what I am getting is I can leave the factory regulator/filter that I am using close to my gas tank on my '72 SS with just a single feed line to the motor with the FAST Rails & there is no need for a return line for the fuel with this set up ?
Will this be like the pic with the fuel pressure gauge on the end of the pas. side fuel rail like DEWMAN & chon79 pic ?which fuel rail kit are you running & do you have a part # ?FAST website shows ...Fuel RAIL kit #146032-kit
Fuel LINE conv. kit #54028-kit
Fuel LINE conv. kit with pres.gauge #54028G-kit
If I could leave all of my current fuel line set up in place without having to run a return line & seperate pres. regulator that would be great !
Thanks for ALL the input & pics guys this is really going to be alot of help to more than just me it looks like .
If you can please post which Rails ,Regulator ,Return or non Return style set up you are using.maybe one of the moderators could make this a sticky if we get enuf info & pics for this set up ?

LilJayV10

iTrader: (39)

Bump for this. I am getting a FAST 102 that comes with the FAST rails. I am going to paint the intake black. I don't know if I want to use the FAST rails or use a stock rail or make it "look" more factory if that makes sense.

Anyone else have any pics?

lemons12

iTrader: (71)

The fast rails look awesome.. I just sold my fast to lil jay but when i do my new intake i will be going back to the fast rails, it just looks so clean.
I hate oem style rails on a fast intake.

LilJayV10

iTrader: (39)

Hopefully it will show up tonight.

If they look that good I will have to think about keeping them.

Hurry up UPS man!

lemons12

iTrader: (71)

it should.. mine doesn't ship until almost six usually. my UPS stuff is all messed up though. The place I use can be kinda crappy sometimes but it is the only close drop off point.

I loved them on mine..

1nasty86

iTrader: (63)

stock rail works fine for me... ls3 injectors/ls3 rail with the injector spacers.

LilJayV10

iTrader: (39)

I didn't think you had to use the spacers if you used the later style injectors?

Magnet

iTrader: (36)

Did you guys have to bend the rails slightly to get them to fit? Mine don't line up correctly as is..

1nasty86

iTrader: (63)

Nope. No bending required