Camaro will be down for a few days. Any ideas?
#1
Camaro will be down for a few days. Any ideas?
I'm sending my PCM to frost tomorrow and my 00 SS will just be sitting in my garage. I planned on giving her a nice detail (love zaino products btw), cleaning the MAF, port and polish the TB...anything else you guys would suggest for a nice tune-up and something to keep me occupied? I just put new plugs in when I did my LTs so that's out..
I have an M6 w/ LT Headers, Cat Back, SLP lid. Don't know if that matters but to save anyone from asking...
I have an M6 w/ LT Headers, Cat Back, SLP lid. Don't know if that matters but to save anyone from asking...
#4
TECH Senior Member
iTrader: (39)
Free Ram Air
http://www.installuniversity.com/ins...sity/index.htm
Under AIR INDUCTION look for TB Bump Stop
Under COOLING SYSTEM look for TB By-Pass
https://ls1tech.com/forums/generatio...g-install.html
This is the BEST article for the TB Bump Stop written by a member here.. It worked great
Good luck and enjoy.. Post the results and pics when finished
http://www.installuniversity.com/ins...sity/index.htm
Under AIR INDUCTION look for TB Bump Stop
Under COOLING SYSTEM look for TB By-Pass
https://ls1tech.com/forums/generatio...g-install.html
This is the BEST article for the TB Bump Stop written by a member here.. It worked great
Good luck and enjoy.. Post the results and pics when finished
Last edited by TORCHD 02 TA; 04-15-2011 at 03:24 AM.
#6
TECH Senior Member
iTrader: (39)
Yeah man not a problem..
if you do the bump stop mod, make sure you use the one written by the member here.. And follow his instructions.. You want to be careful not to grind to much off the TB.. I cannot remember how many volts it is.. Just take your time and be careful
if you do the bump stop mod, make sure you use the one written by the member here.. And follow his instructions.. You want to be careful not to grind to much off the TB.. I cannot remember how many volts it is.. Just take your time and be careful
Trending Topics
#8
I do have EGR. But I just installed the BBK LTs so it will be eliminated. I don't know yet about removing it because between now and next April I have to pass a visual emmissions test in PA. It just has to look like its working technically. Kind of like the cats I want to hollow out and weld on the outside of my ORY to pass the visual...
#9
TECH Veteran
iTrader: (14)
Join Date: Apr 2005
Location: N. Falmouth MA
Posts: 4,085
Likes: 0
Received 0 Likes
on
0 Posts
My car was down all winter, so I did some maintenance work.
To give you ideas.
Check your trans fluid, maybe change it.
Grease the fittings you may have (Aftermarket parts)
Adjust E-Brake
Vacuum, wash windows
Etc etc..
To give you ideas.
Check your trans fluid, maybe change it.
Grease the fittings you may have (Aftermarket parts)
Adjust E-Brake
Vacuum, wash windows
Etc etc..
#14
As far as painting and the appearance mods that may just happen
I will try and post before and after pics
Thanks everyone for your help!