02ws.sik

Found out my pcv hose has a leak in the front by the tb. How do i remove it? I am buy a whole new one from gm parts direct.

sjsingle1

iTrader: (1)

that 2 inches of hose can be replaced with 3/8 fuel line......welcome to to club.....ask me how i know......and the bigger problem is that the rest of it is/will crap out also........i recommend a LS6 valley cover conversion

02ws.sik

What is that and yes it just the one 2 inch part. The 3/8 fuel line can i buy that from autozone? Does it go over the hose or inside the hose? Thanks Justin

sjsingle1

iTrader: (1)

just remove it and replace.....so easy a caveman could do it

02ws.sik

Lol so it just unglugs in front and back and the ground? Does the 3/8 fuel line go over the cut or do you take off that part of the hose?

Blk98Vert

iTrader: (2)

First rip the old crap off. Buy 4 feet of 3/8s fuel line, a 3/8s plastic T connector, and a truck PCV valve (look up the number for an 03 Silverado). You will need to use some of the hardlines so cut accordingly. I ran one line from the drivers side valve cover to the passenger side head, then a small section from the passenger side cover to the hose coming from the drivers side. Connect them with the T fitting, then run a section of hose to the stock PCV location. The rest is self explanatory. Should run you around 20 bucks if you need a new grommet like I did, if not you should pay around 10

02ws.sik

The rest looks fine so can i just do a 2 inch 3/8 fuel line. Do i just take off that small part and slip the 3/8 over?

Blk98Vert

iTrader: (2)

Yes you slip the new fuel line over the hard piece.

02ws.sik

So just undo it from the intake and slide it on and plug it up? Sorry just want to be sure.

DBShocker

yup tats it pretty much plug and play just remove old hose throw it on the ground, maybe stomp on it and throw it away, and then take the new hose and hook it up to the spots u just removed the old hose from and ur done.

02ws.sik

Ok so you can just get new fuel hose and plug and play thanks!