00SUPERSPORT

I just received my SLP FLo Pac with MAF Sensor, but no directions were included!!! Everything is very simple and self explanintory as it seems, but for those who have installed this kit before, is there anything I need to know before I start??? The cold air intake seems to be the only thing that I may have trouble with . Any insight let me know, thanks a gazillion!!!!

SouthFL.02.SS

Give SLP a call. They need to provide instructions for the kit.
It's basically the same cut/hack job as free ram air.

jrp

iTrader: (16)

i've got mine laying around here somewhere. the instructions arent that great anway :shrug:

heres a walkthrough w/o pictures.

http://www.blackcamaro.com/cai.htm

jrp

iTrader: (16)

oh, and dont install the maf.

02WS6Bird

iTrader: (2)

MAF is a waste, but in your case you might have to. SLP gives the bellow that s sized for the MAF rather then stock size when you purchase it, so you ether buy a different bellow to fit the stocker or install it. It's a real easy install so dont worry to much. Also SLP's instructions aren't all that helpful.

dmnall

I would recommend checking SLPs website, I followed their instructions for the CAI, and trust me it is not that bad, the worst is trying to get the AC Condensor shroud off to cut it. The second hardest part was getting the stock lid off of the MAF (i only installed lid and cai).

Charlie

WILWAXU

iTrader: (6)

SLP's website has the instructions listed with the parts. Look up your parts and print them out.

WILWAXU

iTrader: (6)

example here: http://www.slponline.com/view_product.asp?P=21044

Look at the left column.