New Era Throttle Bodies Vs
#1
New Era Throttle Bodies Vs Others
Does anyone know what they do to port their throttle bodies..ie do they knife edge the butterfly or remove the stop etc....
And how do they compare to the Kateck units..which are twice the price
And how do they compare to the Kateck units..which are twice the price
Last edited by BitViper; 11-30-2006 at 10:03 AM.
#3
TECH Veteran
iTrader: (10)
Join Date: May 2006
Location: Bay Area, CA (Pittsburg)
Posts: 4,240
Likes: 0
Received 2 Likes
on
2 Posts
I have a new era ported TB. They do not knife edge the blade. If you ask them to do the bump stop mod they will. I went with New Era because i didnt have much money and they had a good price.
Good quality work for a good price.
Good quality work for a good price.
#4
Thanks for the bump SmokeySS...
Yeah BayArea..$$ are important..and It sounds like its another case of you get what you pay for....Ive been looking at New Era/Shaner/S2 for a while.
The one big point I like about New Era is that you get your own TB back Vs a core charge..and inherate someone elses problems.
Does anyone know if any of the others replace or refurbish or even test the othe bits that are part of the TB before shipping them back out to customers.
I have this nightmare that I get this nice shiny TB back and the other parts (electrical etc) don work or go bad.
Yeah BayArea..$$ are important..and It sounds like its another case of you get what you pay for....Ive been looking at New Era/Shaner/S2 for a while.
The one big point I like about New Era is that you get your own TB back Vs a core charge..and inherate someone elses problems.
Does anyone know if any of the others replace or refurbish or even test the othe bits that are part of the TB before shipping them back out to customers.
I have this nightmare that I get this nice shiny TB back and the other parts (electrical etc) don work or go bad.
#5
TECH Addict
iTrader: (12)
well for what it's worth, my throttle body was done by thunder racing and it was an exchange and teh throttle body i recieved had no problems. there's not much that can go wrong with it and if it's obvious, i doubt they would send it out. in any event, new era is a great company i would love to have them do my ls6 intake. i chose thunder racing on the basis that they knife the blade. i doubt it offers any gains but i just thought it was cool. its really up to you, i really believe they are all the same.
#7
Hey RaggTop..you look familiar....
exactly..what if its not obvious...Ive got to then do the exchange dance..
Yeah..I believe that a ported TB isa ported TB...but with Thunders Price being twice that of new era's I was just wondering what the diff was...
I also know that Thunder Racing TB are actually Katech's product..which is really good stuff
I wonder what would happen if you kept your own electronics....Guess I gotta call'em
Originally Posted by qwikz28
well for what it's worth, my throttle body was done by thunder racing and it was an exchange and teh throttle body i recieved had no problems. there's not much that can go wrong with it and if it's obvious, i doubt they would send it out. in any event, new era is a great company i would love to have them do my ls6 intake. i chose thunder racing on the basis that they knife the blade. i doubt it offers any gains but i just thought it was cool. its really up to you, i really believe they are all the same.
and if it's obvious
Yeah..I believe that a ported TB isa ported TB...but with Thunders Price being twice that of new era's I was just wondering what the diff was...
I also know that Thunder Racing TB are actually Katech's product..which is really good stuff
I wonder what would happen if you kept your own electronics....Guess I gotta call'em
Last edited by BitViper; 11-30-2006 at 11:17 AM.
Trending Topics
#9
Originally Posted by BayAreaSS
I went with new era because of the great price.
Im looking for better throttle responce etc..Im NOT expecting to get a MAJOR increase in HP..but it would be nice to get some "seat of the pants" indication that Ive thrown my money in the right hole
#10
TECH Veteran
iTrader: (10)
Join Date: May 2006
Location: Bay Area, CA (Pittsburg)
Posts: 4,240
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by BitViper
And wre you satisfied? did you notice and difference?
Im looking for better throttle responce etc..Im NOT expecting to get a MAJOR increase in HP..but it would be nice to get some "seat of the pants" indication that Ive thrown my money in the right hole
Im looking for better throttle responce etc..Im NOT expecting to get a MAJOR increase in HP..but it would be nice to get some "seat of the pants" indication that Ive thrown my money in the right hole
So i definately felt it in the upper range. Throttle response was also better...i tapped the gas in second at like 3k and my *** came off the seat a little. Me and a friend both noticed it didnt do that before the Ported TB.
#11
10 Second Club
iTrader: (7)
Join Date: Mar 2005
Location: Buffalo
Posts: 1,159
Likes: 0
Received 0 Likes
on
0 Posts
imo....and im not trying to be a dick...but thats prolly just in your head.... a ported TB will have minimal gains... its more like a "everything adds up" type of deal with the gains
#12
TECH Veteran
iTrader: (10)
Join Date: May 2006
Location: Bay Area, CA (Pittsburg)
Posts: 4,240
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by Turbo LS1 SS
imo....and im not trying to be a dick...but thats prolly just in your head.... a ported TB will have minimal gains... its more like a "everything adds up" type of deal with the gains
everyone is entitled to their own opinion.
#13
Launching!
iTrader: (3)
Join Date: Mar 2006
Location: searching for the perfect driving line
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Have you thought about doing it yourself? It is pretty simple, just take your time. Cheaper than having a shop do it and you don't have to worry about what you're getting back.
I did mine about a week ago and I am happy with the results. Here's the link: Ported TB
I did mine about a week ago and I am happy with the results. Here's the link: Ported TB
#15
Originally Posted by soulless
Have you thought about doing it yourself? It is pretty simple, just take your time. Cheaper than having a shop do it and you don't have to worry about what you're getting back.
I did mine about a week ago and I am happy with the results. Here's the link: Ported TB
I did mine about a week ago and I am happy with the results. Here's the link: Ported TB
Like Dirty Harry said... "A man's got to know his limitations!"
#16
TECH Addict
iTrader: (17)
Join Date: Dec 2002
Location: Hanover, MD
Posts: 2,190
Likes: 0
Received 0 Likes
on
0 Posts
I'll throw in my 2 cents. I have an MTI billet throttle body and I DEFINITELY noticed a difference in throttle response. Not a good TB to go with if price is a main concern, but my point is a good TB can make a noticeable difference, not just one in your head.
Bryan
parbreak
Bryan
parbreak
#18
TECH Fanatic
iTrader: (16)
Join Date: Apr 2005
Location: baltimore, MD
Posts: 1,412
Likes: 0
Received 0 Likes
on
0 Posts
new era here as well. happy with the work and the turn around. i have seen other pics of BO's work and he is super meticulious. i did have to adjust the throttle cable once i got the TB back. other than that everything is good.
#19
TECH Veteran
iTrader: (10)
Join Date: May 2006
Location: Bay Area, CA (Pittsburg)
Posts: 4,240
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by parbreak
I'll throw in my 2 cents. I have an MTI billet throttle body and I DEFINITELY noticed a difference in throttle response. Not a good TB to go with if price is a main concern, but my point is a good TB can make a noticeable difference, not just one in your head.
Bryan
parbreak
Bryan
parbreak