VH5150

can someone explain to me whats the deal with the bracket?? I heard that you need to drill holes in the bracket to mount it properly??? Is that true... I heard that it will mount up but it wount utalize all of the mounting holes on the bracket itself... can anyone shed some light on the subject... pic's possibly.. Im doing the swap soon and id like to get this sorted out before I get to that point...

This is for a c5 corvette....

thanks...

bww3588

iTrader: (49)

you have to drill and tap the hole in the LQ9 block, then you will only use 2 of the 3 bolt holes on the bracket itself. correct me if im wrong, i couldnt find my article. jsut going off the top of my head.

bww3588

iTrader: (49)

C5 brackets are different than the f-body. so this ^^ wont work. idk about the vette brackets.

black01_WS6

iTrader: (13)

some people didn't tapped it and only ran 2 bolts. By tapping the block you can use all three bolts= more secure.

VH5150

for the c5 vette???

bww3588

iTrader: (49)

no, what were talking about is if your putting F-body accessories on a LQ9 block. before you edited your post, that is what i thought you were talking about.

VH5150

ok, what about putting c5 accessories on an lq9 block??? anyone know??

jimbobmckey

iTrader: (3)

Does anyone have pics of the alternator after it was bolted up on the iron block?

02silverstang

iTrader: (7)

i pulled an eng out of a vette that was a lq9 aqnd the braket bolted fine ? am confused .