SATXBlackSS

Can you guys tell me where this hose plugs into? the picture is taken from the front of the engine on the driver's side. Thanks.

tylerdj

iTrader: (31)

If it's that small black hose, it goes to the back of the intake.

SATXBlackSS

Thanks for the quick reply. I have another hose coming from the wire loom plugged into the back of the intake right next to the MAP. Where does that one go?

tylerdj

iTrader: (31)

Is it the one w/ the fitting that I've higlighted?

SATXBlackSS

Not the one for the PCV. I know that plugs into the valve cover. It's the smaller diameter one.

02silvaZ

iTrader: (12)

looks alot like the vacuum line left from the AIR removal

SATXBlackSS

Really? I don't remember removing that hose? Will I notice this at all? ie. performance, ac not blowing, car having an obscene amount of horsepower etc...

02silvaZ

iTrader: (12)

i left mine on there, i just capped it off so there would be no leaks or loss of pressure at all

tylerdj

iTrader: (31)

The hose i've circled is the one I was originally talking about. It's for your AIR system and goes to the back of the intake.

TheSilverOne

iTrader: (22)

correct. your car has the AIR system removed. also disconnect the electrical connector and remove that whole piece.

SATXBlackSS

Well chese, The car has been mine since new I have done everything on this Car(including removing the AIR) and I never remember seeing that thing. Now let me ask you this, there is another hose running from that device that I have running into the back of the intake, what should I do with that? I don't want to have an open hose coming from the intake manifold. Thanks for the help guys.

TheSilverOne

iTrader: (22)

that other hose you plug it up with a screw, for example, so you won't have a vacuum leak. i put some electrical tape over the screw to prevent it from falling out.