PR lenght
#1
TECH Regular
Thread Starter
iTrader: (8)
Join Date: Dec 2009
Location: Fayetteville, NC
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
PR lenght
How do you determine what size Pushrods you need? I am doing a simple Heads/cam setup with 1.7 rockers and supporting mods...will any of this affect it? what about the Head gasket size? How do I determine what thickness gasket I need as well?
thanks guys...
thanks guys...
#4
TECH Resident
iTrader: (2)
Join Date: Sep 2010
Location: Salisbury, NC
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
although I agree. I simply do not feel like typing the full thing out. Basically its pushrod checker, cam on base circle, go to zero lash, tighten rocker to 22 lb/ft, adjust PR checker to determine length and then factor in preload for whatever lifter you have. i think 0.030 is a good number for most LSX lifters but Its definitely 3 am and I could be forgetting something or have that number wrong. Anyone else feel free to chime in
#5
TECH Resident
iTrader: (2)
Join Date: Sep 2010
Location: Salisbury, NC
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/generatio...cam-guide.html
heres the cam guide. pr length is about half way down
heres the cam guide. pr length is about half way down