Ryan K

iTrader: (11)

Well I got my order from SDPC for a set Lunati 72432 Lifters today. Opened up the box and there sat my shiney new Morel Lifters...

So now whats the latest concesus on lifter preload with these lifters? I've seen anything from .010-.060...



SDPC sells them for $366.00 plus shipping.


Thanks yet again for a great deal SDPC!

Ryan K.

mr2guru

iTrader: (16)

min .020 max .030

Your min will probably make a tiny bit more power but will be noiser than the max.

I got the same lifters for about the same price from another sponsor.... but yeah, they are morels.

TAQuickness

iTrader: (28)

Got mine for a good bit less than that from another sponsor.

Set them up at .025.

vettenuts

iTrader: (4)

My Morel's are set at 0.040 which is mid-way in the range I got from talking with Rick Morel. He recommended 0.030 - 0.050" of preload.

Viper

iTrader: (6)

.040 here as well.

JZ'sTA

iTrader: (23)

Good price, glad to see some good lifters a lot cheeper then what they used to sell for.

GuitsBoy

iTrader: (4)

Ive heard .030 more than any other number.

Cop Car

iTrader: (14)

why those instead of stock replacement? you can get LS7 lifters for $120

vettenuts

iTrader: (4)

More precise tolerances, better internals, better valving and better able to lubricate and setup for sitting lower in the bore due to the smaller base circle on aftermarket cams.

MyniceSS

iTrader: (4)

How do you set the clearances with these lifters?