Any one use torquer v.3 cam
05-29-2008, 07:05 PM
#1
Teching In
Thread Starter
Join Date: May 2008
Location: south carolina
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Any one use torquer v.3 cam I am thinking about going with the torquer v.3 cam from texas speed. Has anyone used it or know anyone that has. Any info on its performace would be great. thanks.
05-29-2008, 09:26 PM
#4
TECH Resident
iTrader: (1)
Join Date: Dec 2004
Location: Brookings, South Dakota
Posts: 927
Received 0 Likes
on
0 Posts
What other mods do you have? Are you an A4 or M6? I ran the T3 for 2 years. Its a nice cam...and yes you will get the choppy sound you are looking for.
Do a search for my User Name in the Dyno section and youi can see my graph. It was posted around November '06.
Welcome to the Board.
R/
Frat
Whats up, Brew!!
Do a search for my User Name in the Dyno section and youi can see my graph. It was posted around November '06.
Welcome to the Board.
R/
Frat
Whats up, Brew!!
05-29-2008, 10:09 PM
#5
Teching In
Thread Starter
Join Date: May 2008
Location: south carolina
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Its a 98 z28 m6 mac headers, off road y pipe with cut out and a flowmaster, fast 92/92, k&n fipk, granatelli maf, prc 2.5 heads, rollmaster timing set, ported ls6 oil pump, fast 36 lb injectors, fuel pump kit, under drive pullys, ram powergrip w/ billet flywheel, 3.73 gears and tune. i think that is it.
05-29-2008, 10:32 PM
#7
Well sounds like you're on your way lol. Yeah there is a sound clip at idle and a little driving. I think there's even a race I had in the multimedia section or something. Sorry if I get some time tomorrow I'll post some of it here if you cant find it. Frat has some good comments about it also, try Phenomic too he has it. There's plenty of us out there!
Whats up Frat?! I'll be PMing you soon.
Whats up Frat?! I'll be PMing you soon.
Trending Topics
05-30-2008, 06:21 AM
#9
TECH Resident
iTrader: (1)
Join Date: Dec 2004
Location: Brookings, South Dakota
Posts: 927
Received 0 Likes
on
0 Posts
Dude,
Your there... your mods will compliment that cam nicely. You'll have to take it back for a retune....maybe some tweaking to the VE table, idle, rescale the MAF...ect...
R/
Frat
Your there... your mods will compliment that cam nicely. You'll have to take it back for a retune....maybe some tweaking to the VE table, idle, rescale the MAF...ect...
R/
Frat
05-30-2008, 07:37 AM
#11
11 Second Club
iTrader: (8)
Join Date: Aug 2005
Location: Pasadena, CA
Posts: 2,451
Likes: 0
Received 0 Likes
on
0 Posts
Its a nice cam, it felt like too much cam for me for a DD, but you sound like it wont bother you. It has a nice rough lopy idle, its stilll a mild cam and will make great power.. I had experience with it for only one day, so I cant say too much about it.. But all I heard was excellent things from it...
06-01-2008, 01:40 AM
#16
10-30-2008, 01:24 AM
#18
I would love to see some actual info on how this cam performs. How is the torque? Horsepower? Where does it begin to pull? I would also love to see some of you that actually have the cam, go out and gets some video of the tach/speedometer on a WOT run. Best way to judge how they perform.
