2014 L83 engine swap?
#1
Launching!
Thread Starter
Join Date: Nov 2005
Location: Idaho (for now)
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
2014 L83 engine swap?
In the middle of my swap and I'm still looking for some stand alone engine wiring harness info. I've got all the pin outs for the computer connectors just needing info on what needs fuses and power. Any help would be greatly appreciated!
#6
Launching!
Thread Starter
Join Date: Nov 2005
Location: Idaho (for now)
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Been away from this project for awhile, but I'm back on it. The jeep is close to completion, and yesterday I started the engine. All seemed good other that the VSS is reading 158mph! Tranny probably needs a "fast learn" done on it.
The wiring was more complicated than the previous LS version, but very doable. I'm sure I left things that could be deleted. The power steering was probably the most difficult thing to deal with. I built a mount for a jeep pump under the alternator on the pass side. I'll attach some pictures later.
The wiring was more complicated than the previous LS version, but very doable. I'm sure I left things that could be deleted. The power steering was probably the most difficult thing to deal with. I built a mount for a jeep pump under the alternator on the pass side. I'll attach some pictures later.
Trending Topics
#8
Launching!
Thread Starter
Join Date: Nov 2005
Location: Idaho (for now)
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Moving this discussion to here: https://ls1tech.com/forums/conversio...estions-2.html
Last edited by GENIIIDude; 11-29-2015 at 11:53 PM.