heads/cam results
#1
Launching!
Thread Starter
iTrader: (21)
Join Date: Oct 2003
Location: Tampa,Fla
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
heads/cam results
put the car on the dyno today and was very please to say the least.I'll get the graph up soon.It made 478hp and 425tq.(60 deg temp.)
Mods are-
-12bolt 411 gears with 17x11 ZR1's 315 BFG drags(30 psi)
-spec stage 3 clutch
-xs 1 3/4 headers and y pipe,hooker cat back
-Vegence ported 92mm and NW 92 mm
-42lb green tops
-comp cams 236/242-601/610 on a 113
-TEA stage 2 LS6 heads
-stock short block 39k miles 2001 M6 T.A
I have a set of Kooks 1 7/8 to put on,but wanted to see what the heads gave me being that the heads,injectors and tune was the only change.
the car made 428hp and 375tq without the heads so do the math 50hp 50tq.
I want to thank my bud Kyle,Greg at ANTI VENOM for the awsome tune and Tracy at Rev Xtreme for the dyno pulls
Mods are-
-12bolt 411 gears with 17x11 ZR1's 315 BFG drags(30 psi)
-spec stage 3 clutch
-xs 1 3/4 headers and y pipe,hooker cat back
-Vegence ported 92mm and NW 92 mm
-42lb green tops
-comp cams 236/242-601/610 on a 113
-TEA stage 2 LS6 heads
-stock short block 39k miles 2001 M6 T.A
I have a set of Kooks 1 7/8 to put on,but wanted to see what the heads gave me being that the heads,injectors and tune was the only change.
the car made 428hp and 375tq without the heads so do the math 50hp 50tq.
I want to thank my bud Kyle,Greg at ANTI VENOM for the awsome tune and Tracy at Rev Xtreme for the dyno pulls
#7
Launching!
Thread Starter
iTrader: (21)
Join Date: Oct 2003
Location: Tampa,Fla
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
I got the cam from a friend he had ground for a customer then changed his mind.The heads I bought used on here for a great price.For the combo I have I got off fairly cheap.The Kooks will go on next month,I have to save for the m y-pipe.And thanks for the comments guys. Jim.
Trending Topics
#10
Launching!
Thread Starter
iTrader: (21)
Join Date: Oct 2003
Location: Tampa,Fla
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
I'm really curious about the headers myself.Friends are saying I'll gain some horse power up top but may lose some tq.But should really shine when I spray it.The short block is a 346 that came with the car.SLP lid and stock maf.
#18
TECH Fanatic
iTrader: (3)
Join Date: Apr 2006
Location: Texas
Posts: 1,284
Likes: 0
Received 0 Likes
on
0 Posts
Nice , lets see that graph .
What's the cc of your head's and what headgasket's are you using ? Anything done to the piston's ?
For the money at the time , [there competitively priced now with other header's ] the xs are one of the best bang for the buck header's . I bought mine when they first where being marketed and to my door for $330.00 . That's 1.75'' longtube stainless steel header's . I see they now have HVMC's . Mine have served me well .345rwhp with so so bolt ons through a 9'' , well see how they perform with my new bumpstick soon .
Once again , killer output , hope to see a graph . Doesn't look like you post much so I'll cross my fingers it appear's .
What's the cc of your head's and what headgasket's are you using ? Anything done to the piston's ?
For the money at the time , [there competitively priced now with other header's ] the xs are one of the best bang for the buck header's . I bought mine when they first where being marketed and to my door for $330.00 . That's 1.75'' longtube stainless steel header's . I see they now have HVMC's . Mine have served me well .345rwhp with so so bolt ons through a 9'' , well see how they perform with my new bumpstick soon .
Once again , killer output , hope to see a graph . Doesn't look like you post much so I'll cross my fingers it appear's .
Last edited by cws T/A; 10-31-2008 at 06:07 AM.