Just ordered Moser 12 w/ 3.90 gears. Should I go w/ 4.11?
#1
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Apr 2003
Location: Austin, Tx
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Just ordered Moser 12 w/ 3.90 gears. Should I go w/ 4.11?
They won't order it until tomorrow so I have a little bit of time. I ordered a Moser 12 bolt with all the upgrades and Richmond 3.90 gears instead of 4.11. I will be finishing the 1/4 mile at 5900 rpm's if I trap 116 or 117. With 4.11 I would go through at 6200 rpm's at 117. What do you think? I am looking to the future and taking into account that I might be doing additional mods that will bump up my mph. Some guys have run as much as 4.30 but they all mention that they get no traction on the street. I figure it was a good compromise. Also, the 3.90 allow me to do 86 mph at 2200 rpms instead of 82 mph. I think over 2200 rpms is the point where gas milage starts to suffer and I tend to drive 86 to 90 often.
Any input is appreciated.
Any input is appreciated.
#2
10 Second Club
iTrader: (1)
Re: Just ordered Moser 12 w/ 3.90 gears. Should I go w/ 4.11?
it sounds to me you allready know what you want.i had 3.73's and just went to the 4.10's.every one told me to go 4.10 the first time and i did'nt listen,know i just spent $350.00 to have 4.10's put in.you know what I SHOULD OF WENT 4.10'S THE FIRST TIME,YOU SHOULD TOO. goodluck to ya man.
#5
TECH Senior Member
iTrader: (7)
Re: Just ordered Moser 12 w/ 3.90 gears. Should I go w/ 4.11?
4.10s. With that low a gear you won't notice the extra highway rpms.
Adding a few mph from future mods will still having you crossing at just 6300 or 6400 rpm. Also the future mods will probably cause your power band to be extended in the top end so you'll want extra rpms.
Adding a few mph from future mods will still having you crossing at just 6300 or 6400 rpm. Also the future mods will probably cause your power band to be extended in the top end so you'll want extra rpms.
#6
TECH Apprentice
Join Date: Mar 2002
Location: Newfoundland, Canada
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just ordered Moser 12 w/ 3.90 gears. Should I go w/ 4.11?
it sounds to me you allready know what you want.i had 3.73's and just went to the 4.10's.every one told me to go 4.10 the first time and i did'nt listen,know i just spent $350.00 to have 4.10's put in.you know what I SHOULD OF WENT 4.10'S THE FIRST TIME,YOU SHOULD TOO. goodluck to ya man.
#7
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Apr 2003
Location: Austin, Tx
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just ordered Moser 12 w/ 3.90 gears. Should I go w/ 4.11?
I just got a call today and it turns out they can't get 3.90 for my car. I think its only an option with strange. I guess that solves my problem. 4.11 all the way.
Trending Topics
#11
10 Second Club
iTrader: (47)
Join Date: Nov 2001
Location: Pace, FL
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just ordered Moser 12 w/ 3.90 gears. Should I go w/ 4.11?
DON'T FEAR THE GEAR! 4.30S OR 4.56S baby....
#12
12 Second Club
iTrader: (6)
Join Date: Sep 2003
Location: Burbank, CA
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just ordered Moser 12 w/ 3.90 gears. Should I go w/ 4.11?
If you run out of gear, get taller tires. An extra 2" in diamter is worth about 8-10mph with 4:10's going from 26-28".
#14
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Apr 2003
Location: Austin, Tx
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just ordered Moser 12 w/ 3.90 gears. Should I go w/ 4.11?
I went with 4.11 gears. I asked for Richmond and they sent it with Motives. It's actually being installed as you read this. I should get it back tomorrow. I can't wait.