96Formula6spd

iTrader: (7)

Hey i have long tube headers on my 96 firebird. My old o2 sensors are dead so i am replacing them and buying some o2 wire extensions. What length should I get. 12 inches or 24 inches?

lt1z28camaro

iTrader: (2)

If you already had extensions why not get same length? Kinda varies by headers but I went with 24's jsut to be safe and zip tie them so they don't hang/drag but 12's would probably fine...lol sorry i'm not much help...i just made sure i had long enough extensions so i didn't have to order them send back and order again..

Elliott's94Z

iTrader: (12)

My 12inch ones were just barely long enough. 24's might be a safer route to go.

96Formula6spd

iTrader: (7)

I did not have extensions. They were the cut and add method from pacesetter. Now I just want to add extensions looks like 24 inches will work better.

TABBED 5.3

iTrader: (1)

I went with 2 24" extensions from racetronix, price wasnt too bad. I also have pacesetter headers.

Raven97

I am running hooker longtubes and I only had to extend the wires on the driver side about 6 inches. so I would say that the 12 inch extentions would be enough.

blkZ28mara

Do lt1's use the flat or square connectors?

Elliott's94Z

iTrader: (12)

Flat 4 prong is what I'm running

Raven97

the flat ones are the upstream and the square ones are downstream from the cats, at least thats how it was on my 97 WS6

dilatedpeoples28

iTrader: (16)

flat for pre cat

blkZ28mara

Alright thanks guys