badazzt/a

iTrader: (1)

putting it with a stock bottem end, with 5.3 heads m6...wondering if it would be a good street/strip cam.

00nbmz28

iTrader: (11)

works great for both

regency

iTrader: (15)

would like to know the powerband also!!!

Z28/2002

iTrader: (27)

3500+ RPM

FYI: I turn my MS3 to 7K

IWGF

iTrader: (6)

You're gonna need some 4.10's if you wanna hit that powerband hard at the strip, and snap some rear ends! That's the most fun thing about the 10 bolt!!

00MaroonZ28

iTrader: (3)

I believe the power band is 3000-6700 rpm's It's a good street/ strip cam but I wouldn't do it in a daily driver car.

teke184

iTrader: (5)

there are better cams out there for the street.

something in the low 230s would be a better fit.

my old grind Torquer V1 made 408rwhp this past weekend...peaking at 6300rpm.

torque peaked at about 4800rpm, and was over 350ft lbs from 3500-6000

IWGF

iTrader: (6)

MS4 is fine for the street... You'll be alright man. Call TSP if you have questions about their cams. I have a buddy running and MS4 in his car and it's a daily driver.

streetassasin

iTrader: (30)

what were the TV1 specs? I've always wondered since noone ever talks about it

99mongooSS

iTrader: (4)

while driving the car, I experienced it pulled well from 2700-3600 had a slight powerdip at 3700-4000 but from 4000-7200 it pulled like a freight train.

teke184

iTrader: (5)

from my sig

233/233 .589/.589 112lsa

Bville99gt

I have a MS4 on my daily driven T/A along with ported 243's, longtubes, and 4.10s. The car pulls pretty strong and steady from 4K-7K. I do have a small hesitation around 1.5K when cruising but I think the problem is in the tune.

badazzt/a

iTrader: (1)

well looks like the setup i will have to go with, i was also looking at the 233/239 tsp head/cam package anyone had any luck with them?